|
|
|
Installing the FortiGate unit | Mounting |
Mounting
Adhere the rubber feet included in the package to the underside of the FortiWiFi unit, near the corners of the device.
Place the FortiGate unit on any flat, stable surface. Ensure the unit has at least
1.5inches (3.75 cm) of clearance on each side to ensure adequate airflow for cooling.
Alternatively, you can use the mounting brackets to mount the
Use the four screws supplied to attach the bracket to the FortiWiFi unit. Repeat for the other bracket. See the illustration below for how the bracket is attached.
Figure 5: FortiWiFi with attached mounting bracket
To mount to the wall, measure where the holes in the brackets are on the wall, and inser nails or screws. Hang the FortiWiFi on the nails or screws from the brackets.
Powering on the FortiGate unit
The FortiGate unit does not have an on/off switch.
To power on the FortiGate unit
1Connect the AC adapter to the power connection at the back of the FortiGate unit.
2Connect the AC adapter to the power cable.
3Connect the power cable to a power outlet.
The FortiGate unit starts and the Power and Status LEDs light up. The Status LED flashes while the FortiGate unit starts up.
19 | |
