Fortinet 50A/50B, 100 manual Factory default Dhcp server configuration

Factory defaults

Factory default DHCP server configuration

50A

With the FortiGate-50 series, you can quickly configure the internal network and the FortiGate unit by using the factory default DHCP server settings. See “Quick installation using factory defaults” on page 24

Table 7: FortiGate DHCP Server default configuration

Name	internal_dhcp_server
Interface	Internal
Default Gateway	192.168.1.99
IP Range	192.168.1.110 – 192.168.1.210
Network Mask	255.255.255.0
Lease Time	7 days
DNS Server 1	192.168.1.99

Factory default NAT/Route mode network configuration

When the FortiGate unit is first powered on, it is running in NAT/Route mode and has the basic network configuration listed in Table 8 on page 28. This configuration enables you to connect to the FortiGate unit web-based manager and establish the configuration required to connect the FortiGate unit to the network. In Table 8 on page 28, HTTPS administrative access means you can connect to the web-based manager using HTTPS protocol through this interface. Ping administrative access means this interface responds to ping requests.

Table 8: Factory default NAT/Route mode network configuration

Administrator	User name:	admin
account	Password:	(none)
	IP:	192.168.1.99
Internal interface	Netmask:	255.255.255.0
	Administrative Access:	HTTP, HTTPS,
		Ping
External interface	IP:	192.168.100.99
(FortiGate-50A/100)	Netmask:	255.255.255.0
WAN1 (FortiGate-50B/	Administrative Access:	Ping
WiFi-50B)
WAN2 (FortiGate-50B/	IP:	192.168.101.99
	Netmask:	255.255.255.0
WiFi-50B)	Administrative Access:	Ping
DMZ interface	IP:	10.10.10.1
	Netmask:	255.255.255.0
(FortiGate-50A/100)
	Administrative Access:	HTTPS, Ping
WLAN interface	IP:	10.10.80.1
	Netmask:	255.255.255.0
(FortiWiFi-50B)
	Administrative Access:	Ping

28	FortiGate-50A/50B, FortiWiFi-50B and FortiGate-100 FortiOS 3.0 MR4 Install Guide
	01-30004-0265-20070831