Fortinet 100, 50A/50B manual Document conventions, Typographic conventions

Introduction About this document

This document contains the following chapters:

•Installing the FortiGate unit – Describes unpacking, setting up, and powering on a FortiGate unit.

•Factory defaults – Provides the factory default settings for the FortiGate unit

•Configuring the FortiGate unit – Provides an overview of the operating modes of the FortiGate unit and how to integrate the FortiGate unit into your network.

•Configuring the modem interface – Describes how to configure and use a modem with the FortiGate-50A and FortiGate-50AM units.

•Using a wireless network – Describes configuring a wireless network and postioning the FortiWiFi-50B unit for best reception.

•FortiGate Firmware – Describes how to install, update, restore and test the firmware for the FortiGate device.

Note: This guide covers information on four FortiGate units; the FortiGate-50A, FortiGate-50B, FortiWiFi-50B and FortiGate-100. While most of the content applies to all the units, where information is specific to a certain model, an icon like the ones below will appear next to the content.

50A 50B 100 WiFi-50B

Document conventions

The following document conventions are used in this guide:

•In the examples, private IP addresses are used for both private and public IP addresses.

•Notes and Cautions are used to provide important information:

Note: Highlights useful additional information.

Caution: Warns you about commands or procedures that could have unexpected or ! undesirable results including loss of data or damage to equipment.

Typographic conventions

FortiGate documentation uses the following typographical conventions:

FortiGate-50A/50B, FortiWiFi-50B and FortiGate-100 FortiOS 3.0 MR4 Install Guide	11
01-30004-0265-20070831