Allstar Products Group 110927 specs

Programming Steps for Quik-Code Wireless Keyless Entry

Step 1: The red Keypad lighting should be Off. If it is on, wait until it turns off (approximately 20 seconds).

Step 2: Using the end of a paper clip, put the receiver of the MVP Into Learn Mode by pressing and quickly releasing the recessed learn button located on the super deluxe wall station. The work-lamp on the MVP will turn on (or blink off then on) to indicate the receiver is ready to learn a code. You have approximately 30 seconds to enter the keypad PIN and door code.

Step 3: Press ON/RESET to turn on the keypad. The red lighting on the keypad will turn on.

Step 4: Enter your Four Digit PIN. Every time you press a key the keypad lighting system will blink off and on to verify a key has been pressed.

Learn Button

Super Deluxe

Wall Station

Step 5: The work-lamp on the MVP will turn off when a valid PIN has been learned.

For example, once the MVP is in learn mode you press the following keys: ON/RESET 6 9 7 3.

Using the Quik-Code Wireless Keyless Entry

To operate the keypad press the RESET/ON, enter your PIN. If you make a mistake while entering your PIN press the RESET/ON and wait about 2 seconds and enter the correct PIN. The numbered keys will remain active for approximately 20 seconds after the door starts to move. Pressing any one of the numbered keys during this time will allow you to stop and restart the door’s movement.

For example, press the following keys: ON/RESET 6 9 7 3.

Changing the Quik-Code Wireless Keyless Entry PIN

To change the PIN, follow the programming steps listed above. This will overwrite the old PIN and replace it with the new PIN.

If the MVP receiver has already learned 8 different transmitter codes and a PIN from two different keypads, when you press and release the learn button on the super deluxe wall station the work-lamp on the MVP will start to blink. The MVP receiver memory must be erased before a new PIN can be learned. Once the memory is erased a new PIN can be learned. However, erasing the memory also erases the all of the learned MVP transmitter codes. Once erased, all the transmitters must be re-learned before they will operate the door. To erase the transmitter codes and WKE PINs, while the work-lamp is blinking, press and hold the learn button until the work-lamp turns off (approximately 5 seconds). When the work-lamp turns off, immediately release the program button. If you do not want to continue with the erase function, quickly press and release the learn button.

To re-learn the transmitter codes, press and quickly release the learn button on the super deluxe wall station. The work-lamp on the MVP will turn on (or blink off then on) to indicate the receiver is ready to learn the transmitter code. Press the button you want the receiver to learn. The work-lamp will turn off when a valid transmitter code has been learned. To learn a new PIN, follow the directions above.

110927 specifications

Allstar Products Group 110927 is a remarkable offering in the realm of automotive accessories known for its innovative design and functional features. This product is tailored to enhance vehicle performance and driver convenience, making it a valuable addition for both everyday users and automotive enthusiasts alike.

One of the standout features of the Allstar Products Group 110927 is its robust construction. Designed to withstand the rigors of daily use, it incorporates high-quality materials that ensure durability and longevity. The product operates effectively under diverse environmental conditions, whether in extreme heat or cold, adding to its versatility and reliability.

The Allstar Products Group 110927 utilizes advanced technologies that set it apart from competitors. It showcases an ergonomic design that not only enhances user comfort but also improves overall efficiency. The product’s design elements are thoughtfully curated to facilitate ease of use, making it accessible for individuals of all skill levels. This user-centric approach ensures that consumers can enjoy the product without extensive training or prior experience.

Another key characteristic of the Allstar Products Group 110927 is its adaptability. It is designed to fit a wide range of vehicle types, ensuring that owners of various makes and models can benefit from its features. This universal compatibility is a significant advantage, reducing the hassle of searching for specific accessories that suit individual vehicles.

Additionally, the Allstar Products Group 110927 is equipped with safety features that enhance its functionality. These safety mechanisms contribute to a secure operation, minimizing the risk of accidents and ensuring that users can focus on the road ahead.

In terms of performance, the Allstar Products Group 110927 delivers exceptional results. Whether it is intended for use in seasonal conditions, maintenance tasks, or performance enhancements, it offers functionality that meets consumer demands.

Overall, the Allstar Products Group 110927 stands out as a dependable product blending durability, user-centric design, and advanced technology. Its features cater to a wide audience, making it a practical solution for improving automotive experience and performance. With its commitment to quality and performance, Allstar Products Group has cemented its reputation as a leader in the automotive accessories market.