ZyXEL Communications wireless active fiber router manual Wireless Security WEP, Label, Description

Models: wireless active fiber router

1 183
Download 183 pages 30.96 Kb
Page 38
Image 38
Wireless > Security > WEP

Chapter 4 Wireless LAN

Wireless > Security > WEP

The following table describes the wireless security for WEP labels in this screen

Wireless > Security > WEP

LABEL

DESCRIPTION

Wireless Security

Setup

 

 

Select SSID

Select the desired Service Set Identity (SSID).

 

 

Encryption

Choose the encryption security type, WEP. The other

 

encryption security options are: WPA, WPA2, WPA-Mixed, and

 

Disable. The default is Disable.

 

 

Authentication

Select Open System, Shared Key, or Auto authentication.

 

Auto is the default. This specifies whether the wireless clients

 

have to provide the WEP key to login to the wireless client. Most

 

users keep this setting at Auto or Open System unless they

 

want to force a key verification before communication between

 

the wireless client and the FSG1100HN occurs. Selecting

 

Shared Key forces clients to provide the WEP key prior to

 

communication.

Key Length

Select the level of encryption, 64-bitor 128-bit.

 

 

Key Format

Select ASCII (5 characters) or Hex (10 characters). American

 

Standard Code for Information Interchange (ASCII) is a system

 

using alphanumeric characters. ASCII strings are automatically

 

converted to hexadecimal format for use over a network. Hex

 

uses the actual hexadecimal format based on the numbers 0 to

 

9 and the letters A to F.

 

 

Encryption

Keys are used to encrypt data. Both the FSG1100HN and the

Key 1

wireless stations must use the same WEP key for data

to 4

transmission. If you chose 64-bit, then enter any five ASCII

 

characters or 10 hexadecimal characters ("0-9", "A-F"). If you

 

chose 128-bit, then enter 13 ASCII characters or 26

 

hexadecimal characters ("0-9", "A-F"). At least one key must be

 

configured and up to four keys overall can be configured.

 

However, only one key can be activated at any

 

single time. The default key is Encryption Key 1.

 

 

Apply

Click Apply to save your changes back to the FSG1100HN.

 

 

Reset

Click Reset to reset the settings on this screen.

 

 

38

FSG1100HN User’s Guide

Page 38
Image 38
ZyXEL Communications wireless active fiber router manual Wireless Security WEP, Label, Description