ZyXEL Communications wireless active fiber router manual Attain DNS

Chapter 5 WAN

Attain DNS	Click to attain DNS automatically. Otherwise, enter DNS
Automatically	manually using the field below.
Set DNS Manually	Enter the DNS server IP address(es) assigned by the ISP.
DNS1-DNS3	Enter the DNS server IP address(es) assigned by the ISP.
Clone MAC	Enable MAC address cloning.
Address
Enable UPnP	Enable the Universal Plug and Play (UPnP) feature. Universal
	Plug and Play (UPnP) is a distributed, open networking
	standard that uses TCP/IP for simple peer-to-peer network
	connectivity between devices. A UPnP device can dynamically
	join a network, obtain an IP address, convey its capabilities
	and learn about other devices on the network. In turn, a device
	can leave a network smoothly and automatically when it is no
	longer in use.
Enable IGMP	Enable the IGMP proxy feature. IGMP proxy enables the
Proxy	device to issue IGMP host messages on behalf of hosts that
	the device discovered through standard IGMP interfaces.
Enable Ping	Enable the Ping access on WAN feature. This allows Ping to
Access on WAN	use the WAN to send ICMP echo request packets to the target
	host and listen for ICMP echo response replies.
Enable Web Server	Enable the Web server access on WAN feature. This allows
Access on WAN	Web server access via the WAN.
Enable Multicast	Enable the Multicast shortcut feature. IGMP (Internet Group
Shortcut	Multicast Protocol) is a network-layer protocol used to
	establish membership in a multicast group - it is not used to
	carry user data. The FSG1100HN supports both IGMP version
	1 and IGMP version 2. At start up, the FSG1100HN queries all
	directly connected networks to gather group
	membership. After that, it periodically updates this information.
Enable IPSec Pass	Enable the IPSec Pass Through on VPN connection feature.
Through on VPN	This encapsulates a complete IP datagram, forming a virtual
Connection	tunnel between IPSec-capable devices.
Enable PPTP Pass	Enable the PPTP Pass Through on VPN connection feature.
Through on VPN	Point-to-Point Tunneling Protocol (PPTP) enables secure
Connection	transfer of data through a Virtual Private Network (VPN).
Enable L2TP Pass	Enable the L2TP Pass Through on VPN connection feature.
Through on VPN	Layer 2 Tunneling Protocol (L2TP) is used to support data
Connection	transfer through a Virtual Private Network (VPN). It relies on an
	encryption protocol that it passes within the tunnel to provide
	privacy.
Apply	Click Apply to save your changes back to the FSG1100HN.
Refresh	Click Refresh to begin configuring this screen afresh.

54

FSG1100HN User’s Guide