ZyXEL Communications wireless active fiber router manual Active Wireless Client Table, Label

Chapter 4 Wireless LAN

	built-in to the FSG1100HN must have the same SSID.
Data Rate	Select the data transmission rate. For best performance, it is
	strongly suggested to choose the default, Auto.
Broadcast SSID	Enable or disable the broadcasting of the FSG1100HN’s SSID. If
	this is disabled, the SSID in the outgoing beacon frame will be
	hidden. This prevents a station from obtaining the SSID through
	scanning using a site survey tool.
Block Intra-BSS	Enable this feature to prevent clients on each WLAN from being
Traffic	able to ping each other.
Active Client List	Click the Show button to display the Active Wireless Client
	Table window for AP1, AP2, AP3, or AP4.
Apply	Click Apply to save your changes back to the FSG1100HN.
Refresh	Click Refresh to begin configuring this screen afresh.
Close	Click Close to close this pop-up window.

4.4.2Active Wireless Client Table

The Active Wireless Client Table displays all current associated wireless clients.

Click Wireless > Basic Settings > Show Active Clients to open the Active Wireless Client Table screen.

Wireless > Basic Settings > Show Active Clients

The following table describes the active wireless client labels in this screen

Wireless > Basic Settings > Show Active Clients

LABEL	DESCRIPTION
MAC Address	The MAC address of the wireless client.
Mode	The current mode of the wireless client.
Tx Packet	The number of packets transmitted by this wireless client.
Rx Packets	The number of packets received by this wireless client.
Tx Rate (Mbps)	The packet transmitted rate in Mbps.
Power Saving	The current power saving setting on this wireless client.
Expired Time(s)	The time before this wireless client times out.
Refresh	Click Refresh to begin configuring this screen afresh.
Close	Click Close to close this pop-up window.

34

FSG1100HN User’s Guide