ZyXEL Communications wireless active fiber router manual Wireless Advanced Settings Screen, Label

Chapter 4 Wireless LAN

4.5Wireless Advanced Settings Screen

The Wireless Advanced Settings window allows users to configure the Wireless LAN Interface.

Click Wireless > Advanced Settings to open the Wireless Advanced Settings screen.

Wireless > Advanced Settings

The following table describes the advanced wireless labels in this screen

Wireless > Advanced Settings

LABEL	DESCRIPTION
Wireless Advanced Settings
Fragment	This is the threshold, specified in bytes, for the fragmentation
Threshold	boundary for directed messages. It is the maximum data fragment
	size that can be sent. Packets exceeding the 2346-byte setting will
	be fragmented before transmission. Enter an even number between
	256 and 2346. 2346 is the default.
RTS	Data with its frame size larger than this value will perform the
Threshold	Request To Send (RTS)/CTS (Clear To Send) handshake.
	Enter a value between 0 and 2347. 0 means always send RTS.
Preamble	Choose either Long Preamble or Short Preamble. A preamble
Type	affects the timing in the wireless network. There are two preamble
	types: long and short. If a wireless device uses a different preamble
	type than the FSG1100HN, then it cannot communicate with the
	FSG1100HN.
IAPP	Enable or disable Inter-Access Point Protocol (IAPP). This protocol
	is designed for the enforcement of unique association throughout
	the Extended Service Set and for the secure exchange of a wireless
	station’s security context between a current AP and a new AP
	during the handoff period.
B/G	Enable or disable B/G Protection. This feature limits cross-talk in a
Protection	mixed 802.11b and 802.11g environment.
Frame	Enable or disable Frame Aggregation. This feature increases
Aggregation	throughput by sending two or more data frames in a single
	transmission.

FSG1100HN User’s Guide

35