Harman-Kardon HK 3485 owner manual Antennas, Video Connections

Page 15

CONNECTIONS

Video Connections

Although some sources produce an audio signal only (e.g., CD player, tape deck), many sources output both audio and video signals (e.g., DVD player, cable television box, HDTV tuner, satellite box, VCR, DVR). In addition to the audio connection, you will need to make a video connection for each source.

Composite video is the basic connection most commonly available, and is the only type of video connection available with the HK 3485. The jack is usually color-coded yellow, and looks like an analog audio jack, although it is important never to confuse the two. Do not plug a com- posite video cable into an analog audio jack, and vice versa. Both the chrominance (color) and luminance (intensity) components of the video signal are transmitted using a single cable. See Figure 5.

Composite video cable

Composite video

Figure 5 – Composite Video

Antennas

The HK 3485 uses separate terminals for the included FM and AM antennas that provide proper reception for the tuner.

The FM antenna uses a 75-ohm F-connector. See Figure 6.

Figure 6 – FM Antenna

The AM loop antenna needs to be assembled. Then connect the two leads to the screw terminals on the receiver. See Figure 7.

Figure 7 – AM Antenna

15

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Page Outdoor Antenna Grounding. If an outside antenna Safety InformationImportant Safety Information Page Table of Contents Introduction FRONT-PANEL Controls Speaker 1/2 Press the left side of this button to enableTape Source Phono FRONT-PANEL Information DisplayREAR-PANEL Connections Video Monitor Minutes Remote Control FunctionsRemote Control Functions Subwoofer Connecting Source Devices to the HKConnections Speaker ConnectionsVideo Connections AntennasSpeaker Placement Speaker PlacementStep Three Connect the Antennas InstallationStep One Connect the Speakers Step Two Connect the SubwooferTape Remote Control Device TypesPhono Turntable Compact Disc CD PlayerVideo 3 Source Step Five Connect the Video DisplayStep Six Connect the Remote IR Input and Output Optional Video 2 SourceStep Ten Turn On the HK Step Eight Plug In AC PowerStep Seven Connect Optional External Equipment Step Nine Insert Batteries in RemoteOperation Source Selection HeadphonesUsing the Tuner Speaker 1/2Recording Auto PresetProcessor Reset Dim FunctionMemory Symptom Cause Solution Troubleshooting GuideNTSC/PAL/SECAM HK 3485 Technical SpecificationsVID Appendix

HK 3485 specifications

The Harman-Kardon HK 3485 is a high-performance stereo receiver that epitomizes the essence of premium audio engineering. Designed for audiophiles and casual listeners alike, this device integrates an array of advanced technologies to deliver an exceptional listening experience.

One of the standout features of the HK 3485 is its robust power output, delivering 120 watts per channel at 8 ohms. This ample power ensures that listeners can enjoy a full range of sound dynamics, whether they are blasting their favorite tracks or enjoying a more subtle acoustic performance. The receiver’s sophisticated power amplifier section is designed to provide listening at high volumes without the distortion commonly associated with lower-quality amplifiers.

The Harman-Kardon HK 3485 incorporates a variety of audio inputs, including traditional analog connections as well as digital inputs for modern devices. It features a high-quality built-in phono preamp, ideal for vinyl enthusiasts looking to connect their turntables directly. In addition to its versatility with inputs, the receiver also supports FM and AM radio, enabling users to tune into their favorite radio stations and enjoy music without needing a streaming service.

This receiver is equipped with Harman-Kardon’s proprietary technologies, such as their advanced circuitry that minimizes interference and enhances audio clarity. The receiver's tonal balance control allows users to customize their listening experience based on their preferred sound profiles, accommodating a wide range of genres from deep bass-heavy tracks to high-fidelity classical music.

Another key characteristic of the HK 3485 is its aesthetic design. The receiver showcases a sleek, modern look with a user-friendly interface that includes an informative LCD display for easy navigation through options and settings. The well-rounded remote control adds convenience, allowing users to adjust the volume and switch inputs without needing to get up.

Overall, the Harman-Kardon HK 3485 stands out not just for its performance but for its blend of classic and contemporary features that cater to a variety of listening preferences. With its stellar sound quality, versatile connectivity options, and intuitive design, the HK 3485 is a commendable choice for anyone looking to elevate their audio experience. Whether it is used for home theater systems or dedicated stereo setups, this receiver undoubtedly leaves a lasting impression.
Top Page Image Contents