FINAL INSTALLATION

.

Proper installation of your amplifier should also address several areas; adequate mounting and ventilation, proper signal input interface, correct use of internal crossover networks, “clean” power/ground wiring, proper fusing, and power/speaker wiring.

ADEQUATE MOUNTING AND VENTILATION

Inevitably this amplifier will be mounted in locations with limited space. If possible, try mounting the amplifier on a vertical surface with the fins up/down for best vertical air movement. The mounting screws supplied with this unit should be used for the most secure installation.

SIGNAL INPUT INTERFACE

This amplifier can accept input signals up to 6 volts rms over the RCA input jacks. Due to high input signal capabilities, people may want to interface the high level output of a radio (24 Vrms) to the input of the amplifier. This can be easily done by connecting the “+”lines of the two speaker outputs to the center conductors of the RCA jacks. One common signal ground reference wire is connected from the radio chassis to the shields of the RCA lines connecting to the amplifier input.

High or Low Level Signal Input

“HIGH LEVEL CHASSIS GROUND

“LOW LEVEL AUDIO

RCA LEADS

RR-

t

 

USE OF INTERNAL CROSSOVERS AND TONE CONTROLS

Internal active crossover networks allow for this amplifier to be configured in three possible modes; OFF (FULL-RANGE) disables the crossover so &l frequencies pass through the amplifier, HP (HIGH- PASS) passes only frequencies above the crossover control setting, and LP (LOW-PASS or SUBWOOFER) passes only frequencies below the crossover control setting. In the LP (SUBWOOFER) mode the slope of the crossover is 12 dB/octave at low frequencies (@ 20 Hz), but at the higher end of the control (0220 Hz), the slope approaches 24 dB/octave. This prevents male voices from sounding bad if the control setting is set up around the 220 Hz value.

I LP (LOW PASS) CROSSOVER

I r -.

\\

\

/4

12 dB pe’

OCTAVE

OdB -3

-12

-24

-36

1_

/

/

/

/I

/

ssow

,/

/‘.

1I

, -

I2 dB per

OCTAVE

Page 15
Image 15
Blaupunkt V7000 manual Final Installation, Adequate Mounting and Ventilation

V7000 specifications

Blaupunkt has long been recognized as a leading name in the audio and electronic market, delivering innovative and high-performance products. Among its impressive lineup, the Blaupunkt V7000 stands out as a premium multimedia car radio that combines advanced technology with sleek design, offering users a superior in-car entertainment experience.

One of the main features of the Blaupunkt V7000 is its 7-inch capacitive touchscreen display. This vibrant display ensures users can easily navigate through menus and operate various functions with just a tap. With a resolution that enhances visibility in various lighting conditions, the screen supports an intuitive user interface that makes control seamless while driving.

The V7000 also boasts a variety of connectivity options, making it a versatile choice for modern vehicle owners. It supports Bluetooth technology, allowing for hands-free calling and audio streaming from smartphones and other compatible devices. This feature enables drivers to keep their focus on the road while enjoying their favorite music or podcasts.

In addition, the device is compatible with both Apple CarPlay and Android Auto. This integration enables users to access their smartphone's apps directly through the car's interface, providing navigation, messaging, and media features conveniently. This is particularly beneficial for users who rely on navigation apps for real-time traffic updates and directions.

Sound quality is another highlight of the Blaupunkt V7000. It features a built-in equalizer that allows users to customize sound settings according to their preferences. With multiple audio output options, including USB, auxiliary, and SD card inputs, users can enjoy their audio content in various formats.

Moreover, the V7000 is designed with modern security features, including support for reversing cameras and parking sensors, enhancing safety during driving and parking. The added functionality reduces blind spots and increases awareness of surroundings, making it a valuable upgrade for any vehicle.

In terms of aesthetics, the Blaupunkt V7000 complements any car interior. Its sleek design and illuminated controls not only add to the overall appeal but ensure ease of use at night. The combination of style, technology, and user-friendly features makes the Blaupunkt V7000 an exceptional multimedia car radio that elevates the driving experience. As the demand for integrated technology in vehicles continues to grow, the V7000 stands ready to meet and exceed user expectations, representing the very essence of Blaupunkt's commitment to innovation and quality.