Converting to a Heated System, Viscon HP Heater Cord

Installation

Converting to a Heated System

To convert Model 245187 or 253697 to a heated circulating system, order the following parts. The heaters are available in three voltages. Specify which voltage you desire.

DTwo Viscon HP Fluid Heaters

–Model 245848 (120 V, single-phase, 19.2 amp)

–Model 245863 (240 V, single-phase, 16.7 amp)

–Model 245864 (480 V, single-phase, 8.30 amp)

DDual Heater Mounting Kit 222311

DCirculating Kit 222312

DWarning Label 290074

WARNING

The Viscon HP Heaters must be installed by a qualified electrician in compliance with all state and local codes and regulations, to reduce the risk of electric shock or other serious injury during installa- tion or operation.

The power supply must match the heaters’ require- ments (see above). Refer to the Viscon HP Heater Manual, 309524, for further information.

Accessories for a Heated System

Viscon HP Heater Cord 110160

12 gauge, rated at 105_ C.

WARNING

Do not use in hazardous areas containing flam- mable materials or fumes.

Airless Insulated Hose Kit 222263

25 ft. (7.6 m) nylon fluid hose for use with airless heated systems. Includes an in-line fluid filter, circulat- ing manifold, and 3 ft. (0.9 m) whip hose.

Installing Dual Heater Mounting Kit 222311

WARNING

Before installing the heaters, dual heater mounting kit and circulating kit, follow the Pressure Relief Procedure on page 14. Disconnect all hoses from the pump.

NOTE: Reference numbers marked with an asterisk (for example, 26*) are included in kit 222311.

Apply pipe sealant (36*) to all male threads except at swivel connections.

1.Be sure the wall is strong enough to support the weight of the heaters, hoses, fluid, and stress caused during operation. Locate the holes for the heater wall brackets (26*) exactly as indicated on page 20. Note that one heater will be mounted above and slightly to the left of the other. Use the heater wall brackets as templates to mark the wall.

2.Attach a heater wall bracket to each heater’s mounting posts with the M8 x 1.25 screws and lockwashers supplied with the heater (44).

3.Use M8 or 5/16 in. bolts of the appropriate length and lockwashers (not supplied) to fasten the heater brackets to the wall.

4.Remove the fluid filter (4) and attaching hardware (3, 9) from the pump fluid outlet. Keep the filter, but discard the attaching hardware. See Fig. 5.

10 307932

253697, 307932R, 245185, 245186, 245187 specifications

Graco is a well-respected name in the realm of spray equipment, providing a multitude of solutions designed to meet the needs of both professionals and DIY enthusiasts. Five of their notable products include the Graco 307932R, 245186, 245187, 245185, and 253697. Each product boasts unique features, technologies, and characteristics designed to improve efficiency and deliver exceptional results.

The Graco 307932R is renowned for its high-performance capabilities. This model is particularly suitable for large-scale projects, providing reliable power and consistent pressure. Its innovative design includes a robust durability that extends the service life, minimizing downtime. The user-friendly controls enhance precision and make it easy to master, catering to users of varying skill levels.

Next is the Graco 245186, which focuses on versatility. This model is particularly notable for its ability to handle a wide range of coatings. The emphasis on adaptability allows users to switch between different types of substances effortlessly. Additionally, it features a lightweight design that promotes easy maneuverability, making it a favorite among contractors who require transportability without compromising on performance.

Following closely is the Graco 245187. This unit is designed specifically for intricate detail work, featuring advanced spray technology that provides fine atomization. The precision tip allows for a controlled spray pattern, enabling operators to achieve detailed finishes on various projects, from furniture to detailed woodwork.

Another excellent option is the Graco 245185, which prioritizes user comfort and ergonomics. Designed with the operator in mind, it offers features such as a soft grip handle and an adjustable nozzle, allowing for prolonged usage without fatigue. This thoughtful design consideration translates into enhanced efficiency and a better overall user experience.

Lastly, the Graco 253697 is geared towards sustainability. This model integrates eco-friendly technologies that reduce overspray and material waste, ensuring a more responsible approach to application. It maintains high performance while being mindful of environmental impact, making it a top choice for those who prioritize green solutions.

In summary, Graco's range of products, including the 307932R, 245186, 245187, 245185, and 253697, showcases innovative technologies and features that cater to a variety of professional needs. From high-performance capabilities to user-centric designs, these models reflect Graco’s commitment to quality and excellence in the spray equipment industry.