Graco 245186, 253697, 307932R, 245187, 245185 important safety instructions Table of Contents, Symbols

Page 2

Table of Contents

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Operation/Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 14

Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Mounting Hole Layout . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Graco Standard Warranty . . . . . . . . . . . . . . . . . . . . . . 22

Graco Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Symbols

Warning Symbol

WARNING

This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.

Caution Symbol

CAUTION

This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions.

WARNING

INSTRUCTIONS

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

DThis equipment is for professional use only.

DRead all instruction manuals, tags, and labels before operating the equipment.

DUse the equipment only for its intended purpose. If you are not sure, call your Graco distributor.

DDo not alter or modify this equipment.

DCheck equipment daily. Repair or replace worn or damaged parts immediately.

DDo not exceed the maximum working pressure of the lowest rated system component. Refer to the Technical Data on page 21 for the maximum working pressure of this equipment.

DUse fluids and solvents which are compatible with the equipment wetted parts. Refer to the Tech- nical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.

DDo not use hoses to pull equipment.

DRoute hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 180_F (82_C) or below –40_F (–40_C).

DWear hearing protection when operating this equipment.

DDo not lift pressurized equipment.

DComply with all applicable local, state, and national fire, electrical, and safety regulations.

2 307932

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Part No , 331, Series B Important Safety InstructionsInstructions Part No , 281, Series aTable of Contents SymbolsSkin Injection Hazard Cal treatmentFire and Explosion Hazard Grounding InstallationGeneral Information Supplied Components System AccessoriesAir Line Accessories Red-handled bleed-type master air valveKEY Supplied Components 4414B 44b Converting to a Heated System Accessories for a Heated SystemInstalling Dual Heater Mounting Kit Viscon HP Heater CordInstall the warning label 51 as shown in Fig Installing Circulating Kit 34* 4 27* B Ref 40 49 Packing Nut/Wet-Cup Operation/MaintenancePressure Relief Procedure Flush the Pump Before First UseStarting and Adjusting the Pump Heated Circulating SystemsShutdown and Care of the Pump FlushingParts Model 245187, 331, Series B Model 253697, 281, Series aIncluded in Dual Heater Mounting Kit 222311. Required to 27* B Ref 30*39 41 39 40 49 Mounting Hole Layout Sound Pressure Levels Technical DataSound Power Levels Category DataToll Free Graco Standard WarrantyGraco Information
Top Page Image Contents