Harbor Freight Tools 68375 manual Save This Manual, Symbol Definitions, Set up Precautions

Page 3

Save This Manual

Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial

number in the front of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Safety Warnings

In this manual, on the labeling, and all other information provided with this product:

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not related to personal injury.

CAUTION, without the safety alert symbol, is used to address practices not related to personal injury.

Symbol Definitions

Symbol

Property or Statement

RPM

Revolutions Per Minute

 

 

 

WARNING marking concerning Risk

 

of Eye Injury. Wear ANSI-approved

 

safety goggles with side shields.

 

Read the manual before set-up and/or use.

 

 

 

WARNING marking concerning Risk of

 

Hearing Loss. Wear hearing protection.

 

 

 

WARNING marking concerning

 

Risk of Respiratory Injury. Operate

 

engine OUTSIDE and far away from

 

windows, doors, and vents.

 

WARNING marking concerning

 

Risk of Fire while handling fuel. Do

 

not smoke while handling fuel.

 

WARNING marking concerning Risk of Fire.

 

Do not refuel while operating.

 

Keep flammable objects away from engine.

 

WARNING marking concerning

 

Risk of Explosion.

 

 

WARNING! Read all instructions.

Failure to follow all instructions listed below may result in fire, serious injury and/or DEATH.

The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

Set up Precautions

1.Gasoline fuel and fumes are flammable, and potentially explosive. Use proper fuel storage and handling procedures. Do not store fuel or other flammable materials nearby.

2.Have multiple ABC class fire extinguishers nearby.

3.Operation of this equipment may create sparks that can start fires around dry vegetation. A spark arrestor may be required. The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements.

4.Set up and use only on a flat, level, well‑ventilated surface.

Item 68375

For Pump technical questions, please call 1-800-444-3353.

Page 1

 

For Engine technical questions, please call 1-800-520-0882.

 

Image 3
Contents Using an engine indoors can Kill YOU Gasoline Powered Clear Water PumpPump SpecificationsSymbol Property or Statement Symbol DefinitionsSet up Precautions Safety WarningsCarbon Monoxide Hazard Using an engine indoors can Kill Engine Precautions Operating PrecautionsRefueling Service PrecautionsControls Connecting Hoses Set upDischarge Port Locating the Water Pump Strainer must be fully immersed in waterOperation Concerns Checking and Filling Fuel Pre-Start ChecksOperation Prime the Pump Checking and Filling Engine OilStarting the Engine Break-in Period Stopping the EngineMaintenance and Service Cleaning, Maintenance, and Lubrication ScheduleEngine Oil Change 10W-30 5W-30Recommended Spark Plug Air Filter Element MaintenanceCleaning Spark Plug Maintenance CapAir Filter Cover Muffler Carburetor Drain Bolt Lubrication BatteryStorage FuelProblem Possible Causes Likely Solutions Pump Troubleshooting10% ethanol E15, E20, E85, etc Engine TroubleshootingProblem Possible Causes Probable Solutions Do not use gasoline with more thanCompression Related section Use Engine will not startPart Description Qty Parts List Including Item 68120 212cc engineDiagram Including Item 68120 212cc engine Warranties Emission Control System WarrantyUnited States Emission Control Defects Warranty Statement Manufacturer’s Warranty CoverageLength of Coverage Mission Oaks Blvd. PO Box 6009 Camarillo, CA

68375 specifications

Harbor Freight Tools is well-known for providing high-quality tools and equipment at affordable prices, and the Harbor Freight Tools 68375 is no exception. This versatile and powerful tool is designed to meet the needs of both DIY enthusiasts and professionals alike. The 68375 model is particularly favored for its robust features and user-friendly design.

One of the standout characteristics of the Harbor Freight Tools 68375 is its powerful motor. The tool is equipped with a high-efficiency motor that delivers impressive performance, making it suitable for various applications, from automotive repairs to woodworking projects. Users can expect a reliable power output, which enhances productivity and helps accomplish tasks with precision.

Another key feature of the 68375 is its ergonomic design. The tool is crafted with user comfort in mind, boasting a lightweight structure and intuitive controls. This ensures that even during extended use, operators experience minimal fatigue. The grip is designed to provide maximum control, allowing for precise handling, which is particularly important for intricate tasks.

The Harbor Freight Tools 68375 also integrates advanced safety features that enhance user experience and peace of mind. These include protective guards and safety switches that prevent accidental starts, ensuring that users can operate the tool without unnecessary risks. This focus on safety is a critical consideration for Harbor Freight, reflecting their commitment to customer satisfaction.

Furthermore, the 68375 model is designed for versatility. It comes with multiple attachments and accessories, allowing users to tackle a broad range of projects. Whether you are drilling, sanding, or cutting, this tool adapts easily, making it a valuable addition to any toolkit.

Additionally, the durability of the Harbor Freight Tools 68375 is impressive. Constructed with high-grade materials, it withstands the rigors of daily use, ensuring that it remains reliable over time. This durability is complemented by Harbor Freight's reputation for quality assurance, which further solidifies the trust users place in their products.

In summary, the Harbor Freight Tools 68375 is a well-rounded tool that excels in power, comfort, safety, and versatility. Its thoughtful design and robust features make it a preferred choice among both hobbyists and professionals. Whether for personal projects or professional commitments, the 68375 stands out as an essential tool that delivers consistent performance and reliability. This model exemplifies Harbor Freight's commitment to affordability without compromising on quality, making it a wise investment for anyone in need of a reliable addition to their toolbox.