Harbor Freight Tools 68375 manual Engine Precautions Operating Precautions

Page 4

5.Use only lubricants and fuel recommended in the Specifications chart of this manual.

6.Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/respirator during set up.

Engine Precautions

Follow engine precautions and instructions in the included engine instruction manual.

Operating Precautions

1.Carbon Monoxide Hazard

Using an engine indoors CAN KILL

YOU IN MINUTES.

Engine exhaust contains carbon monoxide. This is a poison you cannot see or smell.

NEVER use inside a home or garage, EVEN IF doors and windows are open.

Only use OUTSIDE and far away from windows, doors, and vents.

2.Keep children away from the equipment, especially while it is operating.

3.Do not touch Pump engine during use.

4.Never store fuel or other flammable materials near the Pump engine.

5.Industrial applications must follow OSHA requirements.

6.Do not leave the equipment unattended when it is running. Turn off the equipment (and remove safety keys, if available) before leaving the work area.

7.Engine can produce high noise levels. Prolonged exposure to noise levels above 85 dBA is hazardous to hearing. Always wear ear protection when operating or working around the gas engine while it is operating.

8.Wear ANSI-approved safety glasses, hearing protection, and NIOSH-approved dust mask/ respirator under a full face shield along with steel-toed work boots during use.

9.People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to a heart pacemaker could cause pacemaker interference or pacemaker failure. Caution is necessary when near

the engine’s magneto or recoil starter.

10.Use only accessories that are recommended by Harbor Freight Tools for your model. Accessories that may be suitable for one piece of equipment may become hazardous when used on another piece of equipment.

11.Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Gasoline-powered engines may ignite the dust or fumes.

12.Stay alert, watch what you are doing and use common sense when operating this piece of equipment. Do not use this piece of equipment while tired or under the influence of drugs, alcohol or medication.

13.Do not overreach. Keep proper footing and balance at all times. This enables better control of the equipment in unexpected situations.

14.Dress properly. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

15.Parts, especially exhaust system components, get very hot during use. Stay clear of hot parts.

16.Do not cover the engine or equipment during operation.

17.Keep the equipment, engine, and surrounding area clean at all times.

18.Use the equipment, accessories, etc., in accordance with these instructions and in the manner intended for the particular type of equipment, taking into account the working conditions and the work to be performed. Use of the equipment for operations different from those intended could result in a hazardous situation.

19.Do not operate the equipment with known leaks in the engine’s fuel system.

20.This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.)

21.When spills of fuel or oil occur, they must be cleaned up immediately. Dispose of fluids and cleaning materials as per any local, state, or federal codes and regulations. Store oil rags in a bottom-ventilated, covered, metal container.

22.Keep hands and feet away from moving parts.

Do not reach over or across equipment while operating.

Page 2

For Pump technical questions, please call 1-800-444-3353.

Item 68375

 

For Engine technical questions, please call 1-800-520-0882.

 

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Gasoline Powered Clear Water Pump Using an engine indoors can Kill YOUSpecifications PumpSymbol Definitions Set up PrecautionsSafety Warnings Symbol Property or StatementEngine Precautions Operating Precautions Carbon Monoxide Hazard Using an engine indoors can KillService Precautions RefuelingControls Set up Connecting HosesDischarge Port Strainer must be fully immersed in water Locating the Water PumpOperation Concerns Pre-Start Checks OperationPrime the Pump Checking and Filling Engine Oil Checking and Filling FuelStarting the Engine Stopping the Engine Break-in PeriodCleaning, Maintenance, and Lubrication Schedule Maintenance and Service10W-30 5W-30 Engine Oil ChangeAir Filter Element Maintenance CleaningSpark Plug Maintenance Cap Recommended Spark PlugBattery StorageFuel Air Filter Cover Muffler Carburetor Drain Bolt LubricationPump Troubleshooting Problem Possible Causes Likely SolutionsEngine Troubleshooting Problem Possible Causes Probable SolutionsDo not use gasoline with more than 10% ethanol E15, E20, E85, etcUse Engine will not start Compression Related sectionParts List Including Item 68120 212cc engine Part Description QtyDiagram Including Item 68120 212cc engine Emission Control System Warranty United States Emission Control Defects Warranty StatementManufacturer’s Warranty Coverage WarrantiesLength of Coverage Mission Oaks Blvd. PO Box 6009 Camarillo, CA

68375 specifications

Harbor Freight Tools is well-known for providing high-quality tools and equipment at affordable prices, and the Harbor Freight Tools 68375 is no exception. This versatile and powerful tool is designed to meet the needs of both DIY enthusiasts and professionals alike. The 68375 model is particularly favored for its robust features and user-friendly design.

One of the standout characteristics of the Harbor Freight Tools 68375 is its powerful motor. The tool is equipped with a high-efficiency motor that delivers impressive performance, making it suitable for various applications, from automotive repairs to woodworking projects. Users can expect a reliable power output, which enhances productivity and helps accomplish tasks with precision.

Another key feature of the 68375 is its ergonomic design. The tool is crafted with user comfort in mind, boasting a lightweight structure and intuitive controls. This ensures that even during extended use, operators experience minimal fatigue. The grip is designed to provide maximum control, allowing for precise handling, which is particularly important for intricate tasks.

The Harbor Freight Tools 68375 also integrates advanced safety features that enhance user experience and peace of mind. These include protective guards and safety switches that prevent accidental starts, ensuring that users can operate the tool without unnecessary risks. This focus on safety is a critical consideration for Harbor Freight, reflecting their commitment to customer satisfaction.

Furthermore, the 68375 model is designed for versatility. It comes with multiple attachments and accessories, allowing users to tackle a broad range of projects. Whether you are drilling, sanding, or cutting, this tool adapts easily, making it a valuable addition to any toolkit.

Additionally, the durability of the Harbor Freight Tools 68375 is impressive. Constructed with high-grade materials, it withstands the rigors of daily use, ensuring that it remains reliable over time. This durability is complemented by Harbor Freight's reputation for quality assurance, which further solidifies the trust users place in their products.

In summary, the Harbor Freight Tools 68375 is a well-rounded tool that excels in power, comfort, safety, and versatility. Its thoughtful design and robust features make it a preferred choice among both hobbyists and professionals. Whether for personal projects or professional commitments, the 68375 stands out as an essential tool that delivers consistent performance and reliability. This model exemplifies Harbor Freight's commitment to affordability without compromising on quality, making it a wise investment for anyone in need of a reliable addition to their toolbox.
Top Page Image Contents