Harbor Freight Tools 68328 manual Save This Manual, Symbol Definitions, Set up Precautions

Page 3

Save This Manual

Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial

number in the front of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Safety Warnings

In this manual, on the labeling, and all other information provided with this product:

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not related to personal injury.

CAUTION, without the safety alert symbol, is used to address practices not related to personal injury.

Symbol Definitions

Symbol

Property or Statement

RPM

Revolutions Per Minute

 

 

 

WARNING marking concerning Risk

 

of Eye Injury. Wear ANSI-approved

 

safety goggles with side shields.

 

Read the manual before set-up and/or use.

 

 

 

WARNING marking concerning Risk of

 

Hearing Loss. Wear hearing protection.

 

 

 

WARNING marking concerning

 

Risk of Respiratory Injury. Operate

 

engine OUTSIDE and far away from

 

windows, doors, and vents.

 

WARNING marking concerning

 

Risk of Fire while handling fuel. Do

 

not smoke while handling fuel.

 

WARNING marking concerning Risk of Fire.

 

Do not refuel while operating.

 

Keep flammable objects away from engine.

 

WARNING marking concerning

 

Risk of Explosion.

 

 

WARNING! Read all instructions.

Failure to follow all instructions listed below may result in fire, serious injury and/or DEATH.

The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

Set up Precautions

1.Gasoline fuel and fumes are flammable, and potentially explosive. Use proper fuel storage and handling procedures. Do not store fuel or other flammable materials nearby.

2.Have multiple ABC class fire extinguishers nearby.

3.Operation of this equipment may create sparks that can start fires around dry vegetation. A spark arrestor may be required. The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements.

4.Set up and use only on a flat, level, well‑ventilated surface.

Item 68328

For Pump technical questions, please call 1-800-444-3353.

Page 1

 

For Engine technical questions, please call 1-800-520-0882.

 

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Using an engine indoors can Kill YOU 2Gasoline Powered Clear Water PumpPump SpecificationsSymbol Property or Statement Symbol DefinitionsSet up Precautions Safety WarningsCarbon Monoxide Hazard Using an engine indoors can Kill Engine Precautions Operating PrecautionsRefueling Service PrecautionsControls Connecting Hoses Set upDischarge Port Operation Concerns Locating the Water PumpChecking and Filling Fuel Pre-Start ChecksOperation Prime the Pump Checking and Filling Engine OilStarting the Engine Turn the Engine Switch onBreak-in Period Stopping the EngineHr. of use Maintenance ProceduresCleaning, Maintenance, and Lubrication Schedule Maintenance and ServiceAir Filter Element Maintenance CleaningEngine Oil Change Spark Plug Maintenance Cap Recommended Spark PlugBrand Storage Problem Possible Causes Likely Solutions Pump Troubleshooting10% ethanol E15, E20, E85, etc Engine TroubleshootingProblem Possible Causes Probable Solutions Do not use gasoline with more thanCompression Related section Use Engine will not startPart Description Qty Parts List Including Item 68124 99cc engineParts Diagram Including Item 68124 99cc engine For Engine For Pump Technical questions, pleaseCall 1-800-444-3353. call Warranties Emission Control System WarrantyUnited States Emission Control Defects Warranty Statement Manufacturer’s Warranty CoverageWarranted Parts Service and MaintenanceConsequential Damages Coverage Coverage ExclusionsMission Oaks Blvd. PO Box 6009 Camarillo, CA

68328 specifications

Harbor Freight Tools has established itself as a reliable source for high-quality yet affordable tools and equipment, appealing to both casual DIY enthusiasts and professional tradespeople. One such product that has garnered attention is the Harbor Freight Tools 68328, a compact and efficient tool that embodies the spirit of innovation and practicality.

The Harbor Freight Tools 68328 is primarily known for its portability and ease of use, making it an ideal option for those who require a dependable tool on the go. This model stands out with its robust structural design and lightweight framework, allowing users to handle it effortlessly without compromising on performance. Its size makes it suitable for tight spaces, enabling access to areas that might be challenging for larger tools.

One of the standout features of the Harbor Freight 68328 is its advanced motor technology, which delivers consistent power and torque. This capability ensures that users can tackle a variety of tasks, from basic home repairs to more complex projects, more efficiently. Additionally, the tool is designed with user comfort in mind. The ergonomic handle provides a secure grip, reducing the risk of slippage and fatigue during extended use.

The 68328 also showcases an impressive array of functionalities that cater to different working conditions. With multiple speed settings, users can adjust the tool's performance based on the specific demands of their project. This versatility is especially beneficial when transitioning between different materials or tasks, optimizing efficiency and effectiveness.

Durability is another hallmark of the Harbor Freight 68328. Constructed from high-quality materials, it is built to withstand rigorous use while maintaining its functionality over time. This durability is complemented by a user-friendly maintenance design, which allows for easy servicing and upkeep, ensuring long-term reliability.

Moreover, safety features such as automatic shut-off and overload protection add an extra layer of reassurance for users, allowing them to focus on their work without constant concern for potential hazards.

In summary, the Harbor Freight Tools 68328 is a standout product that combines portability, efficiency, and durability, making it a valuable addition to any toolbox. Its advanced motor technology, versatile features, and thoughtful design principles work in concert to provide users with a reliable and effective tool tailored to meet a wide range of needs. Whether for professional use or home improvement projects, the 68328 serves as a testament to Harbor Freight’s commitment to quality and affordability in the tool industry.
Top Page Image Contents