Harbor Freight Tools 68328 manual Engine Precautions Operating Precautions

Page 4

5.Use only lubricants and fuel recommended in the Specifications chart of this manual.

6.Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/respirator during set up.

Engine Precautions

Follow engine precautions and instructions in the included engine instruction manual.

Operating Precautions

1.Carbon Monoxide Hazard

Using an engine indoors CAN KILL

YOU IN MINUTES.

Engine exhaust contains carbon monoxide. This is a poison you cannot see or smell.

NEVER use inside a home or garage, EVEN IF doors and windows are open.

Only use OUTSIDE and far away from windows, doors, and vents.

2.Keep children away from the equipment, especially while it is operating.

3.Do not touch Pump engine during use.

4.Never store fuel or other flammable materials near the Pump engine.

5.Industrial applications must follow OSHA requirements.

6.Do not leave the equipment unattended when it is running. Turn off the equipment (and remove safety keys, if available) before leaving the work area.

7.Engine can produce high noise levels. Prolonged exposure to noise levels above 85 dBA is hazardous to hearing. Always wear ear protection when operating or working around the gas engine while it is operating.

8.Wear ANSI-approved safety glasses, hearing protection, and NIOSH-approved dust mask/ respirator under a full face shield along with steel-toed work boots during use.

9.People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to a heart pacemaker could cause pacemaker interference or pacemaker failure. Caution is necessary when near

the engine’s magneto or recoil starter.

10.Use only accessories that are recommended by Harbor Freight Tools for your model. Accessories that may be suitable for one piece of equipment may become hazardous when used on another piece of equipment.

11.Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Gasoline-powered engines may ignite the dust or fumes.

12.Stay alert, watch what you are doing and use common sense when operating this piece of equipment. Do not use this piece of equipment while tired or under the influence of drugs, alcohol or medication.

13.Do not overreach. Keep proper footing and balance at all times. This enables better control of the equipment in unexpected situations.

14.Dress properly. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

15.Parts, especially exhaust system components, get very hot during use. Stay clear of hot parts.

16.Do not cover the engine or equipment during operation.

17.Keep the equipment, engine, and surrounding area clean at all times.

18.Use the equipment, accessories, etc., in accordance with these instructions and in the manner intended for the particular type of equipment, taking into account the working conditions and the work to be performed. Use of the equipment for operations different from those intended could result in a hazardous situation.

19.Do not operate the equipment with known leaks in the engine’s fuel system.

20.This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.)

21.When spills of fuel or oil occur, they must be cleaned up immediately. Dispose of fluids and cleaning materials as per any local, state, or federal codes and regulations. Store oil rags in a bottom-ventilated, covered, metal container.

22.Keep hands and feet away from moving parts. Do not reach over or across equipment while operating.

Page 2

For Pump technical questions, please call 1-800-444-3353.

Item 68328

 

For Engine technical questions, please call 1-800-520-0882.

 

Image 4
Contents 2Gasoline Powered Clear Water Pump Using an engine indoors can Kill YOUSpecifications PumpSymbol Definitions Set up PrecautionsSafety Warnings Symbol Property or StatementEngine Precautions Operating Precautions Carbon Monoxide Hazard Using an engine indoors can KillService Precautions RefuelingControls Set up Connecting HosesDischarge Port Locating the Water Pump Operation ConcernsPre-Start Checks OperationPrime the Pump Checking and Filling Engine Oil Checking and Filling FuelTurn the Engine Switch on Starting the EngineStopping the Engine Break-in PeriodMaintenance Procedures Cleaning, Maintenance, and Lubrication ScheduleMaintenance and Service Hr. of useCleaning Air Filter Element MaintenanceEngine Oil Change Recommended Spark Plug Spark Plug Maintenance CapBrand Storage Pump Troubleshooting Problem Possible Causes Likely SolutionsEngine Troubleshooting Problem Possible Causes Probable SolutionsDo not use gasoline with more than 10% ethanol E15, E20, E85, etcUse Engine will not start Compression Related sectionParts List Including Item 68124 99cc engine Part Description QtyFor Engine For Pump Technical questions, please Parts Diagram Including Item 68124 99cc engineCall 1-800-444-3353. call Emission Control System Warranty United States Emission Control Defects Warranty StatementManufacturer’s Warranty Coverage WarrantiesService and Maintenance Consequential Damages CoverageCoverage Exclusions Warranted PartsMission Oaks Blvd. PO Box 6009 Camarillo, CA

68328 specifications

Harbor Freight Tools has established itself as a reliable source for high-quality yet affordable tools and equipment, appealing to both casual DIY enthusiasts and professional tradespeople. One such product that has garnered attention is the Harbor Freight Tools 68328, a compact and efficient tool that embodies the spirit of innovation and practicality.

The Harbor Freight Tools 68328 is primarily known for its portability and ease of use, making it an ideal option for those who require a dependable tool on the go. This model stands out with its robust structural design and lightweight framework, allowing users to handle it effortlessly without compromising on performance. Its size makes it suitable for tight spaces, enabling access to areas that might be challenging for larger tools.

One of the standout features of the Harbor Freight 68328 is its advanced motor technology, which delivers consistent power and torque. This capability ensures that users can tackle a variety of tasks, from basic home repairs to more complex projects, more efficiently. Additionally, the tool is designed with user comfort in mind. The ergonomic handle provides a secure grip, reducing the risk of slippage and fatigue during extended use.

The 68328 also showcases an impressive array of functionalities that cater to different working conditions. With multiple speed settings, users can adjust the tool's performance based on the specific demands of their project. This versatility is especially beneficial when transitioning between different materials or tasks, optimizing efficiency and effectiveness.

Durability is another hallmark of the Harbor Freight 68328. Constructed from high-quality materials, it is built to withstand rigorous use while maintaining its functionality over time. This durability is complemented by a user-friendly maintenance design, which allows for easy servicing and upkeep, ensuring long-term reliability.

Moreover, safety features such as automatic shut-off and overload protection add an extra layer of reassurance for users, allowing them to focus on their work without constant concern for potential hazards.

In summary, the Harbor Freight Tools 68328 is a standout product that combines portability, efficiency, and durability, making it a valuable addition to any toolbox. Its advanced motor technology, versatile features, and thoughtful design principles work in concert to provide users with a reliable and effective tool tailored to meet a wide range of needs. Whether for professional use or home improvement projects, the 68328 serves as a testament to Harbor Freight’s commitment to quality and affordability in the tool industry.