Maintenance, Putting into Storage | Gardena 4000/5, 6000/6, 5000/5

Special mode:

Additional electrical switching devices (e. g. remote control systems, pressure switches) can be used only in the special mode.

Activating the special mode:

1.When switching on, press the On/Off button ß8a for 8 seconds. During the first 5 seconds, the green LED is illuminated; then the LED blinks for 3 seconds.

2.When the green LED illuminates again after 8 seconds,

let go of the On/Off button ß8a .

Deactivating the special mode:

6. Maintenance

DANGER! Electric shock!

Risk of injury due to electric shock.

v Disconnect Garden Pump from the mains before carrying out maintenance.

Cleaning the filter:

If the filter is dirty it has to be cleaned.

1.Plug the mains plug into an energised mains socket. The pump starts of its own accord.

2.Press the On/Off button ß8a . The pump switches off.

3.When switching on, keep the On/Off button ß8a depressed for 8 seconds until the green LED no longer flashes.

safe-pump-function:The safe-pump function uses the LED status display to alert the user that there is no water flow. In addition, it acts as Dry-Run- ning Safety, guarding against pump damage if the delivery side is closed too long (e.g. closed valves) or if the water supply fails (e. g. empty cistern).

LED flashes green:	Normal operation
LED flashes orange:	No water flow for at least 20 seconds

LED shines red:	No water flow for at least 5 minutes

1.Close all shut-off valves, if any, on the suction side.

2. Unscrew and remove cover 6 of the filter chamber.

3.	Draw out filter unit vertically
	upwards.	1
4.	Hold beaker 0 firmly, turn	0
	filter q anti-clockwise 1 and
	draw out 2 (bayonet fitting).

5. Clean beaker 0 under running water and clean the filter q e. g. with a soft brush.

6. Refit filter again in reverse order.

	(pump has switched off automatically)
LED flashes red:	Alarm! Pump was started 3 times within
	20 min. without water flow. (Pump can
	no longer be started for 5 min. to allow
	cooling, after which the LED shines red)

5. Putting into Storage

Overwintering / Storage: Before the start of the frost period the Garden Pump should be

stored protected from frost.

1. Open the water drain screw 9. The Garden Pump drains.

2. Store your Garden Pump so that it is protected from frost.

Flush through Garden Pump: The pump must be flushed through after discharging chlorinated swimming pool water.

1.Pump through lukewarm water (max. 35 °C), possibly adding a mild cleaning agent (e.g. detergent) until the pumped water runs clear.

2.Remove residuals according to the waste disposal laws applicable in your area.

7. Trouble-Shooting

DANGER! Electric shock!

Risk of injury due to electric shock.

v Disconnect Garden Pump from the mains before trouble-shooting.

Free the impeller:

An impeller blocked by dirt can be freed again.

Disposal:	The product must not be added to normal household waste.
(in accordance with	It must be disposed of in line with local environmental regulations.
RL2002/96/EC)

v Turn the impeller bolt w using a screwdriver. This will free the blocked impeller.

5000/5, 4000/5, 6000/6 specifications

The Gardena 6000/6, 4000/5, and 5000/5 are innovative garden pumps designed to efficiently tackle various watering and irrigation tasks. With robust features tailored to meet the needs of both amateur gardeners and professional landscapers, these pumps have carved a niche in the market for their reliability, performance, and user-friendly design.

One of the most notable features of these Gardena pumps is their strong performance capabilities. The Gardena 6000/6 offers a powerful motor that can deliver a maximum flow rate of 6000 liters per hour, making it suitable for large gardens and extensive irrigation systems. The 4000/5 model, while slightly less powerful, still offers an impressive flow rate of 4000 liters per hour, ideal for medium-sized gardens. Meanwhile, the 5000/5 strikes a balance between the two, providing a solid performance for versatile gardening tasks.

Additionally, all three models incorporate advanced technology to enhance their efficiency and longevity. The built-in electronic pressure switch allows for automatic operation, meaning that the pump starts and stops based on the water demand. This feature not only conserves energy but also protects the pump from running dry, extending its lifespan. The integrated thermal protection prevents overheating, ensuring safe operation even in demanding conditions.

Another significant characteristic of the Gardena pumps is their ergonomic and user-friendly design. Each model features a lightweight body, making them easy to transport and install around the garden. The ergonomic handle adds to convenience, allowing users to carry the pump effortlessly. Moreover, the clear water filter integrated into the design ensures that debris does not clog the pump, contributing to its reliable performance over time.

Maintenance is simplified with these pumps due to their straightforward construction. The easy-to-access cleaning points help users keep their equipment in optimal condition without needing specialized tools. Additionally, the Gardena pumps are designed for quiet operation, minimizing disruption while watering gardens or landscapes.

Overall, the Gardena 6000/6, 4000/5, and 5000/5 pumps exemplify the perfect combination of efficiency, innovative technology, and practical design, making them ideal choices for anyone looking to enhance their gardening experience. Whether for private gardens or professional landscaping projects, these pumps are equipped to deliver outstanding performance and reliability.