Unpacking, Installation | Harbor Freight Tools 95267 guide

18.Water transfers in cycles. Do not attempt to manipulate the switch to keep pump running continuously. It is meant to shut off intermittently. Doing so will damage the pump.

Note: Performance of this pump (if powered by line voltage) may vary depending on variations in local line voltage. Extension cord usage may also affect pump performance.

Warning:The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Unpacking

When unpacking, check to make sure the parts listed on page 8 are included. If any parts are missing or broken, please call Harbor Freight Tools at: 1-800-444-3353.

Installation

Reminder: This pump should be plugged into an outlet fitted with a Ground Fault Circuit Interrupter (GFCI).

Note: Hose connection is covered on page 5.

1.Make sure the pump rests on a flat, level, and solid foundation. Never operate on earth, clay, sand, or gravel surfaces.

2.Never suspend the pump from the power cord or discharge pipe. You may firmly attach a rope to the carry handle.

3.Keep the pump inlet openings, near the suction base, clear of debris.

4.Avoid installation in areas of extreme heat or cold.

5.If the piping you install runs in excess of ten feet, it is recommended you use a check valve (not included) to prevent back flow, which could lead to rapid cycling. To avoid air locks in the pump, drill a 1/8” hole in the piping between the check valve and the pump.

Sump Installation (all instructions above apply)

1.The sump pit must have a minimum diameter of 11” and maximum depth of 18 feet.

2.Construct the pit of tile, plastic, concrete, or steel.

3.Set the pump on a brick or block slightly smaller than the pit. Fill the pit with clean 1” or larger stones to surround the lower half of the pump to keep it stable. The stones should be large enough to not clog any of the inlets.

4.Test pump (see Operation on page 6).

5.Install a sump cover to protect the pump from falling debris.

SKU 95267

Page 4

95267 specifications

Harbor Freight Tools offers a wide range of products catering to both DIY enthusiasts and professional tradespeople, and one of their standout items is the Harbor Freight Tools 95267. This tool has garnered attention for its exceptional value and functionality, targeting users who require reliability without breaking the bank.

The Harbor Freight Tools 95267 is a 20-gallon portable air compressor, specifically designed for various applications such as inflating tires, powering pneumatic tools, and other tasks requiring moderate air pressure. Its compact size makes it easy to transport, allowing users to take it wherever the job demands. The air compressor features a robust 1.5 HP motor, which provides optimal performance while maintaining efficiency. Users can expect a maximum pressure of up to 125 PSI, making it powerful enough for most home and light industrial tasks.

One of the key highlights of the 95267 is its oil-free maintenance design. This means users do not need to add oil for lubrication, making it easier to maintain and reducing the hassle associated with traditional oil-lubricated models. The direct drive design further enhances reliability and efficiency, contributing to its long-lasting performance.

The compressor also features a large 20-gallon tank, which allows for extended use and reduces the frequency of refilling. This tank size strikes a perfect balance between portability and the ability to handle projects requiring sustained power. Additionally, the unit is equipped with a quick recovery time, ensuring that users can get back to their tasks with minimal downtime.

Convenience is further enhanced by the easy-to-read pressure gauge, which allows users to monitor the air pressure levels quickly and efficiently. The integrated safety valve adds an extra layer of protection, ensuring that the system operates within its safe limits.

Overall, the Harbor Freight Tools 95267 air compressor represents an excellent choice for those seeking affordability, portability, and performance. With its no-maintenance design and functional features, it has become a favored tool for DIY jobs and light professional work alike, showcasing Harbor Freight's commitment to providing quality tools for a wide audience.