Operation, Maintenance | Harbor Freight Tools 95267 instruction

Operation

Warning: Do not run the pump dry. It will increase wear to the unit and possibly cause seal damage.

Note: This pump has a built-in thermal protector for the motor, which automatically shuts it off to avoid overheating. After it cools, it will cycle back on. Wait for the cycle to continue. Do not try to turn on the pump manually after it has cut off.

1.Plug unit into an outlet fitted with a Ground Fault Circuit Interrupter (GFCI).

2.The pump will automatically turn on when the water level, or the sump, has filled to approximately 3” above the base. It will stop when the water level drops below 3”. It will continue to recycle thereafter.

3.Check that the discharge water travels several feet from the foundation.

Float Switch Adjustment

There is a Cable Clip (11) that is connected to the Pump Housing (13). The Float Switch

(1)cord snaps into the Cable Clip (11) (see page 8). You can adjust the level that the Pump turns on by adjusting the length of the Float Switch cord.

Note: If air bubbles are spotted around the handle or pressure switch, this is normal. It is trapped air escaping from the unit. This pump is equipped with a de-aerating device which removes air locked in the pump. Also, if the water level drops below the Vent Valve (see page 7 figure B), some water might purge from the pump from the Vent Valve. This is nor- mal. More on air escape is covered in the troubleshooting section.

Maintenance

Pump Motor Maintenance

1.Any repair or replacement of parts should be performed by a qualified service technician.

2.Inlets should be inspected periodically and any debris which clogs them should be removed. Note: Before performing inlet cleaning, disconnect pump from electrical source).

3.Periodically clean the Base (38). Remove the Screws (41) from the Base (38) and remove any dirt or debris. Replace the Base (see page 8).

SKU 95267

Page 6

95267 specifications

Harbor Freight Tools offers a wide range of products catering to both DIY enthusiasts and professional tradespeople, and one of their standout items is the Harbor Freight Tools 95267. This tool has garnered attention for its exceptional value and functionality, targeting users who require reliability without breaking the bank.

The Harbor Freight Tools 95267 is a 20-gallon portable air compressor, specifically designed for various applications such as inflating tires, powering pneumatic tools, and other tasks requiring moderate air pressure. Its compact size makes it easy to transport, allowing users to take it wherever the job demands. The air compressor features a robust 1.5 HP motor, which provides optimal performance while maintaining efficiency. Users can expect a maximum pressure of up to 125 PSI, making it powerful enough for most home and light industrial tasks.

One of the key highlights of the 95267 is its oil-free maintenance design. This means users do not need to add oil for lubrication, making it easier to maintain and reducing the hassle associated with traditional oil-lubricated models. The direct drive design further enhances reliability and efficiency, contributing to its long-lasting performance.

The compressor also features a large 20-gallon tank, which allows for extended use and reduces the frequency of refilling. This tank size strikes a perfect balance between portability and the ability to handle projects requiring sustained power. Additionally, the unit is equipped with a quick recovery time, ensuring that users can get back to their tasks with minimal downtime.

Convenience is further enhanced by the easy-to-read pressure gauge, which allows users to monitor the air pressure levels quickly and efficiently. The integrated safety valve adds an extra layer of protection, ensuring that the system operates within its safe limits.

Overall, the Harbor Freight Tools 95267 air compressor represents an excellent choice for those seeking affordability, portability, and performance. With its no-maintenance design and functional features, it has become a favored tool for DIY jobs and light professional work alike, showcasing Harbor Freight's commitment to providing quality tools for a wide audience.