Troubleshooting

Problem 1: Pump runs but will not deliver any water.

Cause: Base (38) clogged.

Solution: Remove the Screws (1) from the Base (38) and remove Base (38). Clean out dirt or debris and replace.

Cause: When starting, the pump water height falls below the minimum water level.

Solution: Submerge pump deeper.

Cause: Low line voltage.

Solution: Consult with an electrician.

Cause: Optional check valve stuck or installed backwards.

Solution: Remove and examine check valve.

Problem 2: Pump won’t start or run.

Cause: No power or line voltage problem.

Solution: Check power connections and fuses. Consult with an electrician.

Cause: Water level too low.

Solution: Add more water to sump or put pump in a lower location.

Cause: Thermal overload switch has activated.

Solution: See Note at the top of page 6.

Cause: Base (38) clogged.

Solution: Remove the Screws (41) from the Base (38) and remove Base (38). Clean out dirt or debris and replace.

Cause: Tangled Float Switch (1).

Solution: Arrange so Float Switch (1) moves freely.

Cause: Defective motor or Float Switch (1).

Solution: Have a qualified service technician repair or replace.

Problem 3: Excessive noise or vibration.

Cause: Worn bearings.

Solution: Have a qualified service technician repair or replace.

Cause: Debris in Impeller (29).

Solution: Remove the Screws (41) from the Base (38) and remove Base (38). Clean out dirt or debris and replace.

Cause: Discharge restricted.

Solution: Clean pump and piping.

Problem 4: Pump starts and stops too frequently.

Cause: Water temperature too high.

Solution: Never exceed temperatures above 95 degrees F.

Cause: Defective or entangled Float Switch (1).

Solution: Arrange the Float Switch (1) so that it moves freely.

Cause: Back flow of water from piping.

Solution: Install or inspect check valve (optional).

Note: Many problems occur due to a clogged Base (38). Remove the Screws (41) from the Base (38) and remove the Base (38). Clean out dirt or debris from the bottom of the Pump and replace Base (38) using the same screws (see page 8).

SKU 95267

Page 7

95267 specifications

Harbor Freight Tools offers a wide range of products catering to both DIY enthusiasts and professional tradespeople, and one of their standout items is the Harbor Freight Tools 95267. This tool has garnered attention for its exceptional value and functionality, targeting users who require reliability without breaking the bank.

The Harbor Freight Tools 95267 is a 20-gallon portable air compressor, specifically designed for various applications such as inflating tires, powering pneumatic tools, and other tasks requiring moderate air pressure. Its compact size makes it easy to transport, allowing users to take it wherever the job demands. The air compressor features a robust 1.5 HP motor, which provides optimal performance while maintaining efficiency. Users can expect a maximum pressure of up to 125 PSI, making it powerful enough for most home and light industrial tasks.

One of the key highlights of the 95267 is its oil-free maintenance design. This means users do not need to add oil for lubrication, making it easier to maintain and reducing the hassle associated with traditional oil-lubricated models. The direct drive design further enhances reliability and efficiency, contributing to its long-lasting performance.

The compressor also features a large 20-gallon tank, which allows for extended use and reduces the frequency of refilling. This tank size strikes a perfect balance between portability and the ability to handle projects requiring sustained power. Additionally, the unit is equipped with a quick recovery time, ensuring that users can get back to their tasks with minimal downtime.

Convenience is further enhanced by the easy-to-read pressure gauge, which allows users to monitor the air pressure levels quickly and efficiently. The integrated safety valve adds an extra layer of protection, ensuring that the system operates within its safe limits.

Overall, the Harbor Freight Tools 95267 air compressor represents an excellent choice for those seeking affordability, portability, and performance. With its no-maintenance design and functional features, it has become a favored tool for DIY jobs and light professional work alike, showcasing Harbor Freight's commitment to providing quality tools for a wide audience.