Harman-Kardon AVR360 Technical Specifications, Video Section, General, FM Tuner Section

Page 37

Audio Section

Stereo Mode, Continuous Average Power (FTC) AVR 360: 70 Watts per channel, 20Hz - 20 kHz AVR 460: 80 Watts per channel, 20Hz - 20 kHz

@ < 0.07% THD, both channels driven into 8 ohms

7 Channel Surround Modes

Power Per Individual Channel, with all channels driven

Front L&R channels:

AVR 360: 55 Watts per channel

AVR 460: 60 Watts per channel

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Center channel: AVR 360: 55 Watts AVR 460: 60 Watts

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Surround (L & R Side, Back) channels: AVR 360: 55 Watts per channel

AVR 460: 60 Watts per channel

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

AVR 360: 130 watts per channel into 6 ohms

AVR 460: 140 watts per channel into 6 ohms @1kHz, <1% THD, one channel driven.

Input Sensitivity/Impedance

 

Linear (High-Level)

200mV/47k ohms

Signal-to-Noise Ratio (IHF-A)

100dB

Surround System Adjacent Channel Separation

Analog Decoding

40dB

(Pro Logic, etc.)

 

Dolby Digital (AC-3)

55dB

DTS

55dB

TECHNICAL SPECIFICATIONS

Video Section

Television Format

PAL

Input Level/Impedance

1Vp-p/75 ohms

Output Level/Impedance

1Vp-p/75 ohms

Video Frequency Response

 

(Composite)

10Hz–8MHz (–3dB)

Video Frequency Response

 

(Component Video)

10Hz–100MHz (–3dB)

HDMI™

Version 1.3a with 10-bit Deep Color

General

Power Requirement

AC 230-240V/50Hz

Power Consumption

AVR 360: Standby < 1W,

 

540W maximum

 

AVR 460: Standby < 1W,

 

890W maximum

 

(7 channels driven)

Dimensions (Max)

 

Width

440mm

Height

165mm

Depth

382mm

Weight net

AVR 360 : 14,0 kg

 

AVR 460 : 14,4 kg

Depth measurement includes knobs, buttons and terminal connections. Height measurement includes feet and chassis.

Features, specifications and appearance are subject to change without notice.

ENGLISH

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz –130kHz

High Instantaneous

 

Current Capability (HCC)

±35 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Rise Time

16µsec

Slew Rate

40V/µsec

FM Tuner Section

Frequency Range

87.5–108.0MHz

Usable Sensitivity

IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70/68dB (DIN)

Distortion

Mono/Stereo 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz: 70dB

Image Rejection

80dB

IF Rejection

90dB

AM Tuner Section

Frequency Range

522–1710kHz

Signal-to-Noise Ratio

45dB

Usable Sensitivity

Loop 500µV

Distortion

1kHz, 50% Mod 0.8%

Selectivity

±9kHz, 30dB

Please register your AVR 460/AVR 360 at www.harmankardon.com.

NOTE: You’ll need the product’s serial number. At the same time, you can choose to be notified about new products and/or special promotions.

Harman Kardon and Logic 7 are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. EzSet/EQ, Designed to Entertain and The Bridge III logo are trademarks of Harman International Industries, Incorporated.

Apple, iPod, iPhone, iTunes and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries. iPod not included. “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

A-BUS is a registered trademark of Leisure Tech Electronics Pty Ltd. Blu-ray Disc is a trademark of the Blu-ray Disc Association.

CEA is a registered trademark of the Consumer Electronics Association.

Manufactured under license from Dolby Laboratories. Dolby, the double-D symbol and Pro Logic are registered trademarks of Dolby Laboratories. MLP Lossless is a trademark of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 and other U.S. and worldwide patents issued and pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.

Faroudja DCDi Cinema is a trademark of Genesis Microchip Inc.

HD-DVD is a trademark of the DVD Format/Logo Licensing Corporation (DVD FLLC).

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

SACD is a trademark of Sony Corporation. TiVo is a registered trademark of TiVo Inc.

37

Image 37
Contents AVR 460 AVR Important Safety Instructions Safety InformationImportant Safety Information Cleaning Installation LocationDo Not Open the Cabinet Moving the UnitTable of Contents Thank you for choosing a Harman Kardon product IntroductionAudio Section Surround ModesAudio Inputs Supplied AccessoriesAudio/Video Inputs Digital Audio InputsFRONT-PANEL Controls Setting 576i, 576p, 720p, 1080i or 1080pVolume Knob Turn this knob to raise or lower the volume REAR-PANEL Connections When you connect the Hdmi Output to your video display,Use an HDMI-to-DVI adapter REAR-PANEL Connections AVR Remote Control FunctionsRemote Control Functions Zone 2 Remote Control AVR 460 only Typical Home Theater System Introduction to Home TheaterMultichannel Audio Surround ModesConnections Connecting Source Devices to the AVRSpeaker Connections SubwooferAnalog Audio Digital AudioVideo Connections AntennasDigital Video Analog VideoPlacement of Surround Speakers in a 5.1-Channel System Speaker PlacementPlacement of Surround Speakers in a 7.1- Channel System Subwoofer PlacementSource Assignment Worksheet Getting StartedGetting Started Installation Connect IR Control Devices to the Zone 2 IR Input Step Eight Install a Multizone SystemStep TEN Insert Batteries in Remote Step Nine Plug in AC Power CordsStep Eleven Program Sources Into the Remote Step Twelve Turn On the AVR 460/AVR To learn individual key codes AVR 460 onlyEnter a code from , above Using the On-Screen Menu System Initial SetupConfigure the AVR 460/AVR 360, Using EzSet/ EQ Technology Done Select to return to the Speaker Setup menu Set Up SourcesChannel Inputs Audio and Video Input SelectionHDMI-Equipped Multichannel Disc Player You are now ready to begin enjoying your new receiver Dolby Volume Volume ControlDolby Volume Settings OperationHeadphones Sleep TimerMute Function Audio EffectsRDS Tuning Using the RadioRDS Operation RDS Display OptionsUsing The Bridge Using Docking StationRecording Program Search PTYUsing The Bridge III in iPod Manual Mode IPod manual modeRight Arrow N Up or Up Arrow KSelecting a Surround Mode Processor Reset Troubleshooting GuideMemory Table A2 Source Setting Defaults Appendix Default settingsAppendix Table A1 Recommended Source Component ConnectionsVideo Section Technical SpecificationsGeneral FM Tuner Section