Harman-Kardon AVR360 Introduction, Thank you for choosing a Harman Kardon product, Audio Section

Page 5

Please register your AVR 460/AVR 360 at www.harmankardon.com.

NOTE: You’ll need the product’s serial number. At the same time, you can choose to be notified about new products and/or special promotions.

Thank you for choosing a Harman Kardon® product!

For more than fifty years, the Harman Kardon® mission has been to share a passion for music and entertainment, using leading-edge technology to achieve premium performance. Harman Kardon, Inc., invented the receiver, a single component designed to simplify home entertainment without compromising performance. Over the years, Harman Kardon products have become easier to use, while offering more features and sounding better than ever. The AVR 460/AVR 360 multizone 7.1-channel digital audio/video receivers continue this tradition with some of the most advanced audio and video processing capabilities yet, and a wealth of listening and viewing options.

To obtain the maximum enjoyment from your new receiver, please read this manual and refer back to it as you become more familiar with its features and their operation.

If you have any questions about this product, its installation or its operation, please contact your Harman Kardon retailer or custom installer, or visit the Web site at www.harmankardon.com.

INTRODUCTION

Harman Kardon AVR 460/AVR 360 7.1-Channel Audio/Video Receivers

Audio Section

• AVR 460: 60 Watts x 7, seven channels driven at full power at 8 ohms, 20Hz – 20kHz, <0.07% THD, 420 watts total.

AVR 360: 55 Watts x 7, 385 watts total.

High-current capability, ultrawide-bandwidth amplifier design with low negative feedback

All-discrete amplifier circuitry

Quadruple-crossover bass management

• Dual 32-bit Cirrus Logic® DSP processors

192kHz/24-bit A/D and D/A conversion

• Sampling upconversion to 96kHz

• Dolby® Volume processing

Surround Modes

• Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD

• Dolby Pro Logic® II and IIx (Movie, Music and Game), up to 96kHz

• Harman Virtual Speaker

• Harman Headphone

DTS-HD High Resolution Audio™, DTS-HD Master Audio™

• DTS® (5.1; DTS Stereo; DTS-ES® 6.1 Discrete and Matrix)

• DTS 96/24™ (DTS Stereo)

• DTS Neo:6® (Cinema 5-,6- or 7-channel; Music 5-, 6- or 7-channel), up to 96kHz

• Logic 7® (Movie, Music and Game), up to 96kHz

• 5- or 7-Channel Stereo, up to 96kHz

• Surround Off (DSP or Analog Bypass)

ENGLISH

5

Image 5
Contents AVR 460 AVR Important Safety Information Safety InformationImportant Safety Instructions Cleaning Installation LocationDo Not Open the Cabinet Moving the UnitTable of Contents Thank you for choosing a Harman Kardon product IntroductionAudio Section Surround ModesAudio Inputs Supplied AccessoriesAudio/Video Inputs Digital Audio InputsFRONT-PANEL Controls Setting 576i, 576p, 720p, 1080i or 1080pVolume Knob Turn this knob to raise or lower the volume Use an HDMI-to-DVI adapter When you connect the Hdmi Output to your video display,REAR-PANEL Connections REAR-PANEL Connections AVR Remote Control FunctionsRemote Control Functions Zone 2 Remote Control AVR 460 only Typical Home Theater System Introduction to Home TheaterMultichannel Audio Surround ModesConnections Connecting Source Devices to the AVRSpeaker Connections SubwooferAnalog Audio Digital AudioVideo Connections AntennasDigital Video Analog VideoPlacement of Surround Speakers in a 5.1-Channel System Speaker PlacementPlacement of Surround Speakers in a 7.1- Channel System Subwoofer PlacementSource Assignment Worksheet Getting StartedGetting Started Installation Connect IR Control Devices to the Zone 2 IR Input Step Eight Install a Multizone SystemStep Eleven Program Sources Into the Remote Step Nine Plug in AC Power CordsStep TEN Insert Batteries in Remote Enter a code from , above To learn individual key codes AVR 460 onlyStep Twelve Turn On the AVR 460/AVR Configure the AVR 460/AVR 360, Using EzSet/ EQ Technology Initial SetupUsing the On-Screen Menu System Done Select to return to the Speaker Setup menu Set Up SourcesHDMI-Equipped Multichannel Disc Player Audio and Video Input SelectionChannel Inputs You are now ready to begin enjoying your new receiver Dolby Volume Volume ControlDolby Volume Settings OperationHeadphones Sleep TimerMute Function Audio EffectsRDS Tuning Using the RadioRDS Operation RDS Display OptionsUsing The Bridge Using Docking StationRecording Program Search PTYUsing The Bridge III in iPod Manual Mode IPod manual modeRight Arrow N Up or Up Arrow KSelecting a Surround Mode Memory Troubleshooting GuideProcessor Reset Table A2 Source Setting Defaults Appendix Default settingsAppendix Table A1 Recommended Source Component ConnectionsVideo Section Technical SpecificationsGeneral FM Tuner Section