Hitachi 232437 important safety instructions Skin Injection Hazard

Page 4

WARNING

SKIN INJECTION HAZARD

Spray from the gun, hose leaks, or ruptured components can inject fluid into your body and cause extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury.

DFluid injected into the skin might look like just a cut, but it is a serious injury. Get immediate surgi- cal treatment.

DDo not point the gun at anyone or at any part of the body.

DDo not put your hand or fingers over the spray tip.

DDo not stop or deflect leaks with your hand, body, glove or rag.

DDo not “blow back” fluid; this is not an air spray system.

DAlways have the tip guard and the trigger guard on the gun when spraying.

DCheck the gun diffuser operation weekly. Refer to the gun manual.

DBe sure the gun trigger safety operates before spraying.

DLock the gun trigger safety when you stop spraying.

DFollow the Pressure Relief Procedure on page 10 whenever you: are instructed to relieve pres- sure; stop spraying; clean, check, or service the equipment; and install or clean the spray tip.

DTighten all fluid connections before operating the equipment.

DCheck the hoses, tubes, and couplings daily. Replace worn, damaged, or loose parts immediately. Permanently coupled hoses cannot be repaired; replace the entire hose.

DUse only Graco approved hoses. Do not remove any spring guard that is used to help protect the hose from rupture caused by kinks or bends near the couplings.

MOVING PARTS HAZARD

Moving parts, such as the air motor piston and agitator blades, can pinch or amputate your fingers.

DKeep clear of all moving parts when starting or operating the pump.

DAlways shut off the agitator and disconnect the air line before you remove the agitator from the pail or check or repair any part of the agitator.

DBefore servicing the equipment, follow the Pressure Relief Procedure on page 10 to prevent the equipment from starting unexpectedly.

4 308765

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Instructions Parts List Pail Mount Airless PackagesTable of Contents List of ModelsSymbols Equipment Misuse HazardSkin Injection Hazard Fire and Explosion Hazard Setup General InformationPrepare the Operator Prepare the SiteGrounding Supplied Components 106 104 103 101 Pressure Relief Procedure OperationPacking Nut Flush the Pump Before First UsePrime the Pump Install the Spray TipAgitator Operation Models 232437 Adjust the Spray Pattern Shutdown and Care of the PumpKEY Maintenance Preventive Maintenance ScheduleClean the In-Line Fluid Filter Element FlushingParts CST SSTHose and Gun Parts No. DescriptionPart No , Series A, 231 Monark, carbon steel shown Technical Data Sound Power Levels dBaPerformance Charts Sound Pressure Levels dBaDimensions Graco Standard Warranty Graco Information

232437 specifications

The Hitachi 232437 is a versatile piece of machinery designed to meet the demands of various industrial applications. Known for its robustness and reliability, this equipment has become a mainstay in numerous sectors, including construction, manufacturing, and logistics.

One of the standout features of the Hitachi 232437 is its powerful engine. Equipped with advanced technology, the engine delivers a remarkable output while ensuring optimal fuel efficiency. This not only reduces operational costs but also contributes to a lower environmental footprint, making it a responsible choice for environmentally conscious operators. The machine is designed to minimize emissions, adhering to stringent regulations, and promoting sustainability in industrial operations.

The Hitachi 232437 incorporates cutting-edge hydraulic systems, which provide enhanced performance and precision. The hydraulic components are engineered for responsiveness, allowing for smooth control during heavy lifting and excavation tasks. This technology is particularly advantageous in situations that require delicate maneuvers, improving safety and efficacy on job sites.

Another key characteristic of the Hitachi 232437 is its user-friendly interface. The control panel is designed with the operator’s convenience in mind, featuring intuitive layouts and easy-to-read displays. This facilitates quick learning for new operators and ensures that experienced users can optimize performance effortlessly. Enhanced visibility from the operator’s cabin allows for improved awareness of the surrounding environment, thus enhancing safety.

Durability is a hallmark of the Hitachi 232437. Constructed with high-quality materials, the machine can withstand harsh working conditions, making it suitable for outdoor applications. The chassis and components are resistant to wear and tear, resulting in decreased downtime and lower maintenance costs.

The adaptability of the Hitachi 232437 is another of its main draws. It can be fitted with a variety of attachments and tools, enabling it to perform a multitude of tasks, from digging to material handling. This flexibility not only maximizes the return on investment for users but also allows companies to respond swiftly to changing job requirements.

In summary, the Hitachi 232437 stands out for its powerful engine, advanced hydraulic systems, user-friendly design, durability, and adaptability. These features combine to make it a reliable asset in various industrial operations, helping businesses achieve efficiency and productivity while adhering to environmental standards.
Top Page Image Contents