32 Plasma Monitor
Miscellaneous
T
Troubleshooting Checklistroubleshooting Checklist
No output from one of the
speakers • Adjust Balancein the SOUND menu. (Refer to p.17)
Unusual sound from
inside the monitor
• Achange in ambient humidity or temperature may result in an unusual noise
at the time of switching off or on of the monitor and does not indicate a fault
with the monitor.
No picture &
No sound
•Check whether the Monitor is turned on.
• Power cord inserted into wall outlet?
• Plug another product’s power cord into the wall outlet where the Monitor’s
power cord was plugged in.
No or Poor colour
or Poor picture
• Select Colourin the PICTURE menu and press the (G) button.
(Refer to p.16)
• Keep a certain distance between the Monitor and the VCR.
• Activate any function to restore the brightness of the picture.
(If still picture is on the screen for more than 5 minutes, the screen gets dark.)
The remote control
doesn’t work
•Check to see if there is any object between the Plasma Display and the
remote control causing obstruction.
• Check to see if the batteries are installed with the correct polarities.
(Refer to p.15)
• Install new batteries. (Refer to p.15)
Picture OK &
No sound
•Press the Volume +/-button.
• Sound muted? Press Mute ( ) button.
Picture appears slowly,
after switching on
•This is normal as the image is muted during the startup process of the moni-
tor. Please contact your service centre, if the picture has not appeared after
five minutes.
Horizontal/vertical bars
or picture shaking •Check for local interference such as an electrical appliance or power tool.