Harman-Kardon AVR 660, AVR 760 owner manual Video Adjustments, Video Modes

Page 9

Video Adjustments

The AVR 760/AVR 660 uses leading-edge Faroudja DCDi Cinema video processing technology. Incoming video is upscaled to 1080p (1080i with component video outputs) for outstanding video quality, even with analog video sources. The Faroudja DCDi Cinema Dual 3D comb filters and 10-bit video processing eliminate the jagged edges and moiré patterns seen with less advanced processing.

The “Torino” video processing chip generates on-screen graphics in high definition, and blends it with the incoming video, so that you can continue to watch a program while using system menus.

The video processor automatically provides the best picture based on the capabilities of your video display and the incoming source video. You may experiment with the Video Modes menu adjustments to try to improve the picture further.

Video Modes

Adjust the picture settings on your video display before adjusting the AVR. Access the picture settings from the Video Modes menu. Press the Video Modes Button, and the screen shown in Figure 33 will appear. The menu may also be accessed from the Info Settings menu.

NOTE: The settings in the Video Modes menu affect each source independently.

Figure 33 – Video Modes Menu

Video Mode: The default setting of Off passes the video signal through to the display without any picture processing. Video scaling cannot be turned off, but selecting the HDMI Bypass mode in the Info Settings menu for a source connected to one of the HDMI Inputs passes the video signal directly from the HDMI Input to the HDMI Output, bypassing all video processing. Select one of these processing options to optimize the picture for the current program by applying adjustments to the brightness, contrast, color and sharpness:

•• Sports: For sporting events.

•• Nature: For programs shot outdoors, in a natural setting.

•• Movie: For movies and many television broadcasts.

•• Custom: Allows manual adjustment of the picture settings. The Brightness, Contrast, Color and Sharpness settings appear as sliders with values ranging from 0 to 100. The default setting for each adjustment is 50. Use the M N Buttons to change each setting’s value.

ADVANCED FUNCTIONS

Picture Adjust: Changes the aspect ratio of the displayed image. Widescreen (16:9) images are displayed on a full-screen (4:3) device in letterbox format. Black bars may appear above and below the image.

When displaying full-screen images on a widescreen device, black or gray bars may appear to the left and right of the image (pillarboxing).

Plasma and CRT monitors may suffer from “burn-in” when the same image, such as the horizontal or vertical bars, is left on screen for a long period of time. Adjust the picture so that it fills the display’s screen. Highlight this setting and press the OK Button. Each press of the KL Buttons changes the setting. Press the OK Button when the desired setting appears.

•• Auto Fit: The AVR automatically adjusts the image, as required, to fit the display’s capabilities.

•• Height Fit: Adjusts the image to eliminate any bars above or below it. Bars may remain at the sides.

•• Width Fit: Adjusts the image to eliminate any bars on the sides. Bars may remain above and below the image.

•• Zoom 1x: Displays the image as received from the source. If the image is in the 4:3 aspect ratio, on widescreen displays pillarbox format may be used. If the image is in the 16:9 aspect ratio, on full-screen (4:3) displays letterbox format may be used.

•• Zoom 2x and Zoom 3x: Stretches the image evenly to completely fill the screen. The outer portions of the image may be cropped.

Experiment with this setting until you find a pleasing display format for each program.

Overscan: For historical reasons, there is a convention to reserve an area around the border of a video frame, called “overscan”, that may be viewed on newer high-definition displays, although it was not visible on older analog television sets. However, since not all displays are capable of showing this portion of the frame, directors avoid placing important information in that area.

If your video display is capable of displaying the overscan area, turn this setting on to avoid seeing a black border around the image which could cause unwanted “burn-in” on some plasma and CRT displays. The AVR turns this setting off by default when the source device is connected to one of the HDMI Inputs. The setting is turned on by default when the source is connected to one of the analog video inputs.

Advanced Video Settings: Press the N or OK Button to display the Advanced Video Modes submenu (see Figure 34). This submenu is not accessible when the video processor (Video Mode setting) is turned off.

Figure 34 – Advanced Video Modes Menu

ENGLISH

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents AVR 760 AVR Important Safety Information Important Safety InstructionsTable of Contents and Features Digital Audio Signals Analog Audio SignalsAudio Processing and Surround Sound Surround ModesIndicates that an LFE channel is present Dolby Surround SettingsStep Three Manual Setup Menu Manual Speaker SetupStep ONE Determine Speaker Crossover Step TWO Measure Speaker DistancesAdjust Crossover Frequencies Menu Sub ModeAdjust Speaker Distance Menu Audio Effects Step Four Setting Channel Output Levels ManuallyVideo Modes Video AdjustmentsBrightness Adjustment How to Adjust the Custom Picture SettingsContrast Adjustment Color AdjustmentSharpness Adjustment System SettingsMultizone Operation Operating the Multizone SystemUpgrade Software If a software upgrade is released for General AVR SettingsMenu Appearance System InformationMain Menu Advanced Remote Control FunctionsActivities Macros To program, or record an activityTo program the remote’s back light mode Remote ResetPunch-Through Programming Back LightTable A1 Recommended Source Component Connections Appendix Default settings, worksheets, remote product codesDevice Type Video ConnectionsCable/Sat Table A2 Source Setting DefaultsRadio Game BridgeTable A4 Delay Setting Defaults Table A3 Speaker/Channel Setting DefaultsTable A6 Audio Effects Settings Table A5 Source SettingsMedia Default Cable/Sat Network Source a Source B Source C Source DTable A7 Video Modes Settings Off Black Level Deinterlacing Film Mode DetectInternet Radio Network Source a Source B Source C Table A9 Remote Control Codes Table A8 Surround ModesSource Input Device Type if changed Table A10 System Settings Table A11 Network SettingsTable A12 Zone 2 Settings Table A13 Surround Modes Surround Mode Description Incoming Bitstream or SignalSee below Mode Group Enveloping sound field is desired See below Mode GroupChannel to 5.1 modes Dolby Pro Logic Movie Back channel Analog 2-channel TunerDTS Stereo Setting to be offPresentation DTS Neo6 DTS 2/2/.0 or .1, 3/2/.0 orRemote Control Function List Reference Button Name Table A14 Remote Control Function ListButton Name

AVR 660, AVR 760 specifications

Harman-Kardon has long been recognized as a leader in the home audio industry, and their AVR 760 and AVR 660 receivers exemplify this reputation. These models are designed to deliver high-quality audio and video performance for a rich entertainment experience, making them ideal additions to any home theater setup.

The Harman-Kardon AVR 760 is a powerful 7.1-channel receiver that offers an impressive 100 watts per channel. It features advanced audio technologies such as Dolby Atmos and DTS:X, which provide immersive, three-dimensional sound by allowing audio to move around the listener in a realistic manner. This capability enhances the viewing experience for movies, concerts, and games, immersing users in a surround sound environment.

Equipped with the latest HDMI technology, the AVR 760 supports 4K Ultra HD video, ensuring that users enjoy stunning picture quality with enhanced detail and clarity. The receiver includes multiple HDMI inputs and outputs, which allow seamless connectivity to various devices such as gaming consoles, Blu-ray players, and streaming devices. Additionally, HDR (High Dynamic Range) compatibility is supported, enhancing contrast and color presentation on compatible displays.

The AVR 660, while slightly lower in wattage at 80 watts per channel, offers similar capabilities and features that make it a strong contender in the home audio market. It also supports Dolby Atmos and DTS:X technologies, delivering a captivating audio experience. With its 7.1-channel configuration, the AVR 660 is designed to provide rich sound quality for home theater enthusiasts.

Both models come with built-in Wi-Fi and Bluetooth connectivity, allowing users to stream music directly from their smartphones or tablets. They also feature Spotify Connect, which facilitates easy access to music playlists. The receivers are compatible with various streaming services, enabling users to enjoy their favorite tracks effortlessly.

The user interface of both the AVR 760 and AVR 660 is intuitive, with an easy-to-navigate on-screen display that makes setup and configuration straightforward. Additionally, the receivers feature Multi-Room Audio functionality, allowing users to expand their audio experience beyond the main theater area by distributing sound throughout the home.

In conclusion, the Harman-Kardon AVR 760 and AVR 660 represent a perfect blend of power, advanced technology, and user-friendly features. Whether you’re a cinephile or a music lover, these receivers are engineered to elevate your home entertainment experience to new heights. With stunning audio and video capabilities, they stand as a testament to Harman-Kardon's commitment to quality and innovation in the world of audio equipment.
Top Page Image Contents