Operating Instructions, Troubleshooting Guide

Operating Instructions

WARNING: Unplug cord from electrical outlet before servicing and when leaving unattended.

To Operate:

IMPORTANT - Always wear shoes when using your Low Boy.

Raise the handle pin release with foot.

Lean handle back. While handle is released and with both hands on handle grips, squeeze the ON/OFF lever located on the right grip to turn on.

To Attach the Drive Pad Holder or Brush:

Lay the machine on its back to reveal the bottom pan. Align the indentations in the pad holder with the brackets around the bottom pan. Place your hands on opposite sides of the pad holder and using the heel of your hands, push the pad holder onto the pan.

Use the included key to rotate the swing arms clockwise to lock the pad holder to the bottom pan. Place a pad on the floor and position the machine so that as the handle is raised the pad holder is centered on the pad.

To Attach the Pad:

Lay the floor machine on its back with the handle lying on the floor to reveal the brush holder pan. Place the pad over the round brush holder pan making sure it is in place.

CAUTION: NEVER put the pad on the machine by placing it on the floor and moving the running machine over it, or placing the machine over the pad and then starting the motor.

To Guide the Machine

Hold the handle with both hands and push with the palms of your hands to move in the forward direction, then cup your hands and pull to bring back. The design of the machine eliminates the fatigue associated with controlling other floor machines.

Care of your Oreck Low Boy Floor Machine

This is a precision machine. Dropping, unreasonable bumping or rough handling may result in damage. Remove brushes after use. The bristles may be damaged due to the weight of the machine. Store your machine in the upright position. After each use, remove wax or cleaning solutions. After sanding, blow sawdust off motor and locking mechanism.

Lubrication: With the handle in its lowest position, periodically place one drop of oil (3-in-One) on the thrust bearings.

THRUST BEARINGS

Troubleshooting Guide

WARNING: Unplug cord from electrical outlet before servicing.

PROBLEM	POSSIBLE SOURCE	AREAS TO CHECK
FLOOR MACHINE	Not plugged in	Be sure cleaner is
WILL NOT RUN	properly.	firmly plugged into
		wall outlet.
	No electricity in wall	Check electrical
	outlet.	source–fuse or
		circuit breaker.
	Motor circuit	Reset motor circuit
	breaker has	breaker.
	tripped.

HANDLE WILL NOT	Locking pin needs	Clean locking
UNLOCK	cleaning	mechanism

HANDLE IS HARD TO	Lower handle pivot	Oil pivot bearings.
RAISE OR LOWER	Lower handle pivot	Oil pivot bearings.
RAISE OR LOWER	bearings need oiling
	bearings need oiling

ALL OTHER SERVICING SHOULD BE DONE BY AN ORECK AUTHORIZED SERVICE CENTER.

CALL CUSTOMER SERVICE HOT LINE

US: 1-800-989-3535 Canada: 1-888-676-7325

Whenever calling, please be sure to have your model and serial number from data plate.

53231-03 REV A	© 2003 Oreck Holdings, LLC. All Rights Reserved. All word marks, logos, registered trademarks and product configurations are
6/03 ECU# R-7138	owned and used under the authority of Oreck Holdings, LLC.

LB8000 specifications

The Oreck LB8000 is a high-performance vacuum cleaner designed with the needs of allergy sufferers and pet owners in mind. Combining lightweight maneuverability with powerful suction, this vacuum is a popular choice for both residential and commercial cleaning tasks. Weighing in at just under 8 pounds, it allows users to easily carry it from room to room or even up and down stairs without straining their backs.

One of the standout features of the Oreck LB8000 is its advanced vacuum technology, which includes a highly efficient motor that reaches speeds of up to 30,000 RPM. This powerful motor enhances suction capability, ensuring that dirt, dust, and pet hair are effectively lifted from various surfaces including carpets, hardwood floors, and upholstery. Additionally, the vacuum is equipped with a dual fan system which improves airflow, contributing to its efficiency.

The Oreck LB8000 also boasts a unique filtration system. It is designed with a HEPA filter that captures 99.97% of particles as small as 0.3 microns, a crucial feature for those suffering from allergies. The filter is washable and reusable, reducing waste and long-term costs for users. Furthermore, the vacuum features a built-in dust bag that holds more dirt than traditional models, which means less frequent changes and enhanced cleaning performance.

Another notable characteristic of the LB8000 is its ergonomic design. The handle is designed for comfortable gripping, making even extended cleaning sessions manageable. The vacuum also includes an adjustable height feature, allowing it to seamlessly transition between different floor types. The easy-to-maneuver design means that users can navigate around furniture and corners with ease.

The Oreck LB8000 is also equipped with various attachments, including a crevice tool and an upholstery nozzle. These accessories allow for versatile cleaning options, enabling users to tackle hard-to-reach areas and various surfaces effortlessly.

In summary, the Oreck LB8000 stands out as a lightweight, powerful vacuum cleaner that caters to the specific needs of its users. With its advanced suction technology, efficient filtration system, ergonomic design, and versatile attachments, it is a comprehensive tool for maintaining a clean and healthy living environment. Whether you have pets or simply want to ensure a dust-free home, the Oreck LB8000 offers a practical solution to your cleaning challenges.