Harman-Kardon AVR 2700 Operating Your AVR, Selecting a Source, Listening to FM and AM Radio

Page 31

AVR

Operating Your AVR

ENGLISH

Selecting a Source

There are three different ways to select a source:

ssPress the front-panel Source List button. Use the Up/Down buttons to scroll through the sources, and press the OK button to select the source being displayed.

ssUsing the on-screen menus, press the AVR button, highlight “Source Select” and press the OK button. Scroll to the desired source in the slide-in menu and press the OK button.

ssYou can directly select any source by pressing its Source Selector button on the remote.

The AVR selects the audio and video inputs assigned to the source, and any other settings you made during setup.

The source name, the audio and video inputs assigned to the source, and the surround mode will appear on the front panel. The source name and active surround mode will also briefly appear on the TV screen.

Video Troubleshooting Tips

If there is no picture:

ssCheck the source selection and video input assignment.

ssCheck all connections for a loose or incorrect connection.

ssCheck the video input selection on the TV/display device.

ssPress the front-panel Resolution button and use the Up/Down buttons until the correct video output resolution is selected and a picture appears. The CANCEL message will also appear. Press the Down button to view the ACCEPT option, then press the OK button.

Additional Tips for Troubleshooting HDMI Connections

ssTurn off all devices (including the TV, the AVR and any source components).

ssUnplug the HDMI cables, starting with the cable between the AVR and the TV, and continuing with the cables between the AVR and each source device.

ssCarefully reconnect the cables from the source devices to the AVR. Connect the cable from the AVR to the TV last.

ssTurn on the devices in this order: TV, AVR, source devices.

NOTE: Depending upon the particular components involved, the complexity of the required communication between HDMI components may cause delays of up to a minute in the completion of some actions, such as input switching or switching between SD and HD channels.

Listening to FM and AM Radio

Select the Radio source. A screen similar to the one in the illustration below will appear.

AM/FM Radio

1

FM 87.50 MHz

Auto

Menu: MENU

Set Presets: OK

Presets:

Use the Up/Down buttons or the Remote’s Channel buttons to tune a station as displayed on the front panel and on-screen display.

The AVR defaults to automatic tuning, meaning each press of the Up/Down buttons scans up or down the frequency band until a station with acceptable signal strength is found. To switch to manual tuning, in which each press of the Up/Down buttons steps through a single tuning frequency increment, press the remote’s Menu button. A slide-in menu will appear. Select “Mode,” and press the OK button to toggle between automatic and manual tuning modes.

Once you have tuned an FM station, toggling the Mode setting also switches the radio between stereo and monaural reception. (Mono reception may improve reception of weaker stations.)

Preset Stations

You can store a total of 30 stations (AM and FM combined) as presets. When you want to save the currently tuned station as a preset, press the OK button, and two dashes will flash. Use the Number buttons to enter the desired preset number.

To tune to a preset station:

ssPress the Left/Right buttons.

ssPress the skip forward/skip backward Transport Control buttons.

ssPress the Menu button and scroll to the desired preset, then press the OK button.

ssEnter the preset number using the Number buttons. For presets 10 through 30, press 0 before the preset number. For example, to enter preset 21, press 0-2-1.

Listening to Media on a USB Device

Your AVR is compatible with MP3 and WMA media.

MP3 compatibility: Mono or stereo, contstant bit rates (CBR) from 8kbps to 320kbps, variable bit rates (VBR) from lowest to highest quality, with sample rates from 8kHz – 48kHz.

WMA compatibility: Ver. 9.2, stereo CBR with 32kHz – 48kHz sampling rate and 40kbps

–192kbps bit rate, mono CBR with 8kHz – 16kHz sampling rate and 5kbps – 16kbps bit rate, VBR Pass Encoding and Quality Encoding 10 – 98, 44kHz and 48kHz sampling rate.

No other types of media can be played.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents AVR 3700,AVR AVR 2700,AVR AVR Table of ContentsIntroduction Supplied AccessoriesPlace the Receiver Front-Panel Controls Front-Panel Controls Volume knob Turn this knob to raise or lower the volumeFront-Panel Controls Connector Rear-Panel ConnectorsNetwork Rear-Panel Connectors Rear-Panel ConnectorsSystem Remote Control Functions System Remote Control Functions System Remote Control FunctionsZone 2 Remote Control Functions AVR 3700/AVR 370 only Zone 2 Remote Control Functions AVR 3700/AVR 370 only Multichannel Audio Introduction to Home TheaterIntroduction to Home Theater Typical Home Theater SystemPlace Your Speakers Place Your SpeakersSource Device Connections Types of Home Theater System ConnectionsSpeaker Connections Subwoofer ConnectionsVideo Connections USB Port RS-232 ConnectorNetwork Connector Radio ConnectionsConnect Your TV or Video Display Making ConnectionsConnect Your Speakers Connect Your SubwooferSource Buttons and Assigned Connectors Assigned Connectors Connected DeviceMaking Connections Making Connections Connect Your Video Recorder USB and iOS DevicesConnect Your Analog Audio Devices Connect Your Audio RecordersAVR 3700/AVR 370 only Install a Multizone SystemConnect to Your Home Network Connect the Radio AntennasAVR and Source Devices Installed Inside of Cabinet Speaker WireConnect IR Equipment Mono 1/8-inch Connect to AC PowerAC Input Connector External IR Receiver Zone 2 Speakers Connect the Trigger OutputAUX Controls Hdtv tuner boxes, CD players, VCRs and PVDs Set Up the Remote ControlSet Up the Remote Control Install the Batteries in the Remote ControlLearning AVR 3700/AVR 370 only Set Up the Remote ControlUsing the On-Screen Menu System Set Up the AVRSet Up the AVR Configure the AVR for Your SpeakersThrough the speakers Set Up the AVRSet Up Your Sources For multizone operationCreating Hdmi Bypass Inputs Set Up the NetworkWireless Network Setup AVR 3700/AVR Wired Network SetupUsing your iOS 5 device to join the wireless network Operating Your AVR Operating Your AVRListening to Media on a USB Device Operating Your AVRSelecting a Source Listening to FM and AM RadioListening to an iPod/iPhone/iPad Device IPod or iPhone Function Remote Control KeyPlaying files on a USB device Listening to Media via Your Home Network Listening to vTuner Internet RadioPress the Menu button to view the slide-out menu To share media on PCs Selecting a Surround ModeAudio Effects Video ModesAdvanced Functions Advanced FunctionsAudio Processing and Surround Sound Video Processing Advanced FunctionsAudio Effects Button Color Adjustment How to Adjust the Custom Picture SettingsBrightness Adjustment Contrast AdjustmentManual Speaker Setup Manual Speaker SetupCrossover Size Manual Speaker SetupWrite down the settings in Table A6 in the Appendix Sub ModeStep Four Setting Channel Output Levels Manually Status This line lets you turn Zone 2 on or off Listening in ZoneGeneral AVR Settings System SettingsSystem Settings Hdmi SettingsMenu Appearance Settings LockSystem Info Processor Reset Advanced Remote Control ProgrammingSleep Timer Resetting the RemoteSymptom Cause Solution TroubleshootingSpecifications SpecificationsVia USB Appendix Default settings, worksheets, remote product codesCable/Sat RadioPosition All Digital and Two-Channel Your SettingsTable A3 Speaker/Channel Setting Defaults AppendixServer Default Cable/Sat Disc Media RadioDisc Media Network GameDisc Media Radio Table A7 Video Modes Settings DefaultDisc Media Radio USB Network Game Table A11 Zone 2 Settings Source Input Default Table A10 System Settings FeatureDefault Dolby Pro Logic Ss#ENTER 7IDTHDADJUSTS Widthdof VocalcsoundstageSs0ANORAMA ADJUSTS Wraparound Surround Effect Dolby Digital StereoDolby Pro Logic IIz DTS-HDDTS Neo6 Appendix Remote Control Function List ReferenceRew WW Table A13 Remote Control Function ListRadio Media Server Button Name Blu-ray/DVD DMC1000 USB/iPodRew Play RewTable A14 Remote Control Product Codes TV Table A16 Remote Control Product Codes AUX-VCR Table A15 Remote Control Product Codes AUX-HDTVTable A18 Remote Control Product Codes DVD Table A17 Remote Control Product Codes AUX-CDTable A20 Remote Control Product Codes Game Table A19 Remote Control Product Codes SATTable A21 Remote Control Product Codes Cable Table A24 Remote Control Product Codes AUX- TiVo Table A22 Remote Control Product Codes Media Server

AVR 2700, AVR 3700 specifications

The Harman-Kardon AVR 3700 and AVR 2700 are high-performance audio-video receivers that offer impressive features and technologies for home theater enthusiasts. Designed for those who value both sound quality and versatility, these models stand out with their powerful amplifications and comprehensive connectivity options.

The AVR 3700 boasts a 7.2-channel architecture, delivering a robust audio experience with a total output of 100 watts per channel. It supports the latest surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring a cinematic audio experience that is both immersive and detailed. With Harman-Kardon's proprietary DSP algorithms, users can enjoy dynamic sound staging and precision sound imaging.

The AVR 2700, while slightly less powerful with its 7.1-channel setup, still provides 80 watts per channel and supports similar advanced audio formats. It offers excellent sound quality, making it an ideal choice for users who may not require the higher output levels of the AVR 3700.

Both models incorporate advanced HDMI technology, with multiple HDMI inputs and outputs that support 4K video pass-through, allowing seamless integration with modern 4K televisions and other high-definition sources. The AVR 3700 includes up to eight HDMI inputs, while the AVR 2700 features six, providing ample connectivity for streaming devices, gaming consoles, and Blu-ray players.

Furthermore, the Harman-Kardon receivers come equipped with AirPlay and Bluetooth for easy wireless streaming. This allows users to play their favorite music directly from smartphones, tablets, or computers without the hassle of cables. Both models also support DLNA, enabling access to networked audio files.

Another key feature of both receivers is the MultEQ room calibration technology. This sophisticated system analyzes the room’s acoustics and adjusts the receiver’s audio output accordingly, optimizing sound quality for various listening environments.

The AVR 3700 and AVR 2700 also feature intuitive user interfaces, making it easy to navigate settings and options. A user-friendly remote control, along with mobile app compatibility, further enhances the overall experience.

In summary, the Harman-Kardon AVR 3700 and AVR 2700 represent excellent choices for anyone seeking to elevate their home entertainment system. With their powerful audio capabilities, extensive connectivity options, and advanced audio technologies, these receivers are engineered to provide a rich and engaging audio-visual experience. Whether you’re watching movies, listening to music, or gaming, both models ensure that every sound is delivered with clarity and precision.
Top Page Image Contents