Getting Started - cont’d
fig. 2 | fig. 4 |
|
fig. 3
fig. 5
2Use the lavender loop on the side of the
Then secure the quick fasteners on the top of the pocket to lock in place. (fig. 2)
3Snap the mop head into the base to secure it. (fig. 3)
4Open the flap on the back of the steam mop. (fig. 4)
Use the filling flask and pour water into the tank. Do not overfill. Close the flap on the water tank. (fig. 5)
IMPORTANT: Do not use on unsealed wood or unglazed ceramic floors. On surfaces that have been treated with wax or some no wax floors, the sheen may be removed by
the heat and steam action. It is always recommended to test an isolated area of the surface to be cleaned before proceeding. We recommend that you check the use and care instructions from the floor manufacturer.
NOTE: To prolong the life of your Steam Mop, we recommend using distilled water.
4
TOLL FREE:
SE400_11_IB_E_111003_1.indd 4 |