Using Your Steam Mop

English

IMPORTANT: Make sure you do not use the mop without attaching a micro-fiber cleaning pad and adding water to the tank first. When you are using the mop for the first time, it might take longer than the normal 30 seconds to start steaming.

fig. 7

fig. 6

IMPORTANT: Your Steam Mop needs water to make steam! Never use your steam mop without water in the tank.

Sweep or vacuum your floors prior to cleaning with your Steam Mop.

Visit www.sharkclean.com for other great quick cleaning products to complement your Steam Mop, such as the Shark® Navigator™ Lift Away® (model NV350).

1Pull and twist the quick release cord holder to unwrap the power cord completely. Plug into a 120-volt electrical outlet. (fig. 6)

2The Steam Control buttons will flash blue. If the light does not turn on, reference the troubleshooting section on page 12. (fig. 7)

www.sharkclean.com

SE400_11_IB_E_111003_1.indd 5

11-10-04 11:35 AM