Harman-Kardon AVR5 owner manual System Configuration, Speaker Placement

Page 16

System Configuration

17

When all audio, video and system con- nections have been made, there are a few configuration adjustments to be made. A few minutes spent to correctly configure and calibrate the unit will greatly add to your listening experience.

Speaker Selection and Placement The placement of speakers in a multi- channel-home-theater system can have a noticeable impact on the quality of sound reproduced.

No matter which type or brand of speakers is used, the same model or brand of speaker should be used for the front left, center and right speakers. This creates a seamless front soundstage, and elimi- nates the possibility of distracting sonic disturbances that occur when a sound moves across mismatched front channel speakers.

Speaker Placement

Depending on the type of center channel speaker in use and your viewing device, place the center speaker directly above or below your TV or in the center behind a perforated front projection screen.

Once the center channel speaker is installed, position the left and right front speakers so that they are as far away from one another as the center channel speaker is from the preferred

speaker. If possible, adjust all front loudspeakers so that they are aimed at ear height when you are seated in the listening position.

Using these guidelines, you’ll find that it takes some experimentation to find the correct location for the front speakers in your particular installation. Don’t be afraid to move things around until the system sounds correct. Optimize your speakers so that pans across the front of the room sound smooth, and that sounds from all speakers appear to arrive at the listening position at the same time with- out delay from the center speaker as opposed to the left and right speakers.

Surround speakers should be placed on the side walls of the room, at or slightly behind the listening position. The center of the speaker should face into the room. The speakers should be located so that the bottom of the cabinet is at least two feet higher than the listeners’ ears when seated in the desired area.

If side wall mounting is not practical, the speakers may be placed on a rear wall, behind the listening position. Again, they should be located so that the bottom of the cabinet is at least two feet higher than the listeners’ ears. The speakers should be no more than six feet behind the rear of the seating area.

Center Front Speaker

No more than 24"

Left Front

Right Front

Speaker

Speaker

A)Front Channel Speaker Installation with Direct-View TV Sets or Rear-Screen Projectors

 

 

TV or Projection Screen

 

 

Left Front

Center Front

Right Front

 

Speaker

 

Speaker

Speaker

 

 

No more than 6 feet

when rear-mounted speakers are used

Optional Rear Wall Mounting

 

 

 

 

B)The distance between the left and right speakers should be equal to the distance from the seating position to the viewing screen. You may also experiment with placing the left and right speakers slightly forward of the center speaker.

listening position. Ideally, the front channel speakers should be placed so that their tweeters are no more than 24" off center from the tweeter in the center channel speaker.

Depending on the specifics of your room acoustics and the type of speakers in use, you may find that imaging is improved by moving the front left and right speak- ers slightly forward of the center channel

Subwoofers produce non-directional sound, so they may be placed almost anywhere in a room. Subwoofer place- ment is highly influenced by room size and shape, and the type of subwoofer used. Follow the instructions of the sub- woofer’s manufacturer, or experiment with the best location for a subwoofer in your listening room.

At least 6 inches from ceiling

At least 2 feet

Image 16
Contents AVR5 Table of Contents AVR5 Audio/Video ReceiverIntroduction Description and FeaturesPhono Input Section Safety Information Important Safety InformationCleaning UnpackingTypographic Conventions Moving the UnitFront Panel Controls ÷ õ óFront Panel Controls Øwill show the channel where Rear Panel Connections Rear Panel Connections Remote Control Functions VCROFF 15 ms 20 ms System Installation Installation and ConnectionsAudio Equipment Connections Remote Control Extension External Audio Power Amplifier ConnectionsAC Power Connections Speaker’s manufacturerSystem Configuration Speaker PlacementSystem Setup Plug the Power Cable Ý to an unswitched AC outletCenter Speaker Configuration Output Level AdjustmentButtons ÷ when Test CTR appears in the display Delay Settings To set the delay times, follow these stepsOperation Basic OperationSource Selection For private listening, plug the 1/4Surround Mode Selection Surround Mode ChartChannel Direct Operation External Amplifier ConnectionTuner Operation Station SelectionPreset Tuning Auto PresetRecalling Preset Stations Clearing Preset StationsMemory Backup Processor ResetProgramming the Remote Programming the RemoteDirect Code Entry Press and hold both the DeviceCode Readout Programmed Device FunctionsProgramming the Remote Function List No. AVR5Reference for Function List AVR DVD VCR TVSetup Code Tables Setup Code Tables TV Realistic VCR Setup Code Tables VCR DVD Carver Troubleshooting Guide If the problem is Make sure thatTechnical Specifications Staple or clip original invoice here YIAR-I2000-ZZA

AVR5 specifications

The Harman-Kardon AVR5 is a sophisticated A/V receiver designed to elevate your audio and visual experiences. Seamlessly integrating premium sound quality with advanced technology, it caters to both audiophiles and casual listeners alike.

One of the standout features of the AVR5 is its powerful amplification system. With a robust output that ensures dynamic range and clarity, the receiver delivers booming bass and crisp highs, creating an immersive sound stage that fills any room. The AVR5 supports multiple channels, allowing users to configure their home theater setups according to personal preferences, whether it’s a simple stereo system or a full surround sound environment.

Another significant characteristic is support for high-resolution audio formats. The AVR5 is compatible with various lossless audio codecs, ensuring that music and movie soundtracks are reproduced with impressive fidelity. This receiver enables listeners to fully appreciate their music library, with exceptional detail in both instrument separation and vocal clarity, providing an untainted listening experience.

Connectivity is also a priority with the Harman-Kardon AVR5. It features an array of inputs and outputs, including HDMI, optical, and RCA connections. The HDMI capabilities support 4K video passthrough, ensuring that your video content is delivered in stunning detail. Additionally, the receiver includes support for HDCP 2.2, which is essential for playing certain 4K content without compatibility issues.

One of the innovative technologies embedded in the AVR5 is its advanced room correction system. This technology measures the acoustics of your room and automatically adjusts the speaker settings to optimize sound performance. This ensures that whether you are listening to music or watching a movie, the audio is tailored to your specific environment, enhancing the overall experience.

Finally, the user interface of the AVR5 is designed with simplicity in mind. Easy-to-navigate menus and remote control functionality make it straightforward to adjust settings, switch inputs, or fine-tune audio preferences. The inclusion of smartphone compatibility enhances this convenience, allowing users to control the receiver from their mobile devices.

Overall, the Harman-Kardon AVR5 stands out as a versatile, high-performance receiver that combines cutting-edge technology with user-friendly features, making it an excellent choice for upgrading any home entertainment system.