Bissell 9400, 9300, 8920 warranty Setting, Back on once the object is removed

Page 10

Carpet Cleaning (Continued)

2.

Fill the Formula Tank. Fill up the Formula Tank

by first unscrewing the Cap and Insert. Always

 

 

use genuine BISSELL formulas to maximize

 

cleaning and for the safety of your machine. Fill

 

formula up to the line and replace the Cap and

 

Insert. Place Formula Tank into the slot in the

 

back of the machine for a snug fit.

3.

Set Custom Clean Dial. Simply choose one of

the 4 settings (Heavy Traffic, Normal Clean, Light

 

Clean, or Rinse) and the ProHeat 2X will adjust

 

the right amount of cleaning solution

 

to mix with the heated water to fit your

 

cleaning need.

 

When your cleaning job is finished, the formula

 

can be stored ready to use in your machine for

 

the next time!

 

This feature is available on all ProHeat 2X

 

models, either at the foot of the machine,

 

or on the handle.

4.

Set Ready Tools Dial to the Floor Cleaning

Setting.

5.

Turn the Power Switch and Heater On. Plug

into a proper outlet and turn the Power and

 

Heater switches to the ON ( I ) position. Allow 1

 

minute for the built-in heater to warm-up before

 

cleaning. The ProHeat 2X will be fully warmed

 

and will provide optimal performance after a

 

minute of continuous heated cleaning.

6.

Cleaning Strokes. While pressing the Trigger,

make one slow forward wet pass and another

 

 

one back. Let the Built-In Heater, formula, and

 

DirtLifter PowerBrushes do the work for you.

 

Caution: Do not overwet. Take care not to run

 

over loose objects or edges of area rugs. Stalling

 

brush may result in premature belt failure.

 

Note: Your machine is equipped with a

 

circuit breaker that will automatically shut

 

off the brush if a large or loose object is

 

caught in the brush roll. If that happens, be

 

sure to unplug your machine, remove the

 

foreign object, and then plug the machine

 

back in to reset the circuit breaker. This can

 

also be done by turning the machine off and

 

back on once the object is removed.

 

Release the Trigger and make one slow forward

 

and backward pass over the same area to

 

remove any residual dirty water and aid in

 

drying. Repeat cleaning passes until solution

 

being pulled up appears clean. Continue passes

 

without pressing the trigger until you can’t see

 

any more water being pulled up. After cleaning,

 

you may want to turn the Custom Clean dial

 

to Rinse to give your carpeting a final Water

 

Only rinse. This will ensure thorough removal of

 

embedded dirt loosened by the deep

 

cleaning formula. BISSELL deep cleaning

 

formulas contain an anti-resoiling agent that

106

helps your carpets repel dirt and keeps them

looking good longer.

WARNING:

To Reduce the Risk of Fire and Electric Shock due to internal componet damage, use only BISSELL cleaning fluids intended for use with the deep cleaner.

Keep plenty of genuine BISSELL Fiber Cleansing Formula™ and Scotchgard™ protector cartridges on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and void

the warranty.

22a

33a

45

Power Heater

Switch Switch

Page 9 Page 11
Image 10
Page 9 Page 11
Contents ProHeat Thanks for buying a Bissell ProHeat Important Safety Instructions Optional Accessories 16 oz. Bissell Wrap Power Cord and Flex Hose as shown How to Use this GuideHow To Put It Together Hose Secure LatchSpecial Features of Your Bissell ProHeat Built-in Heater FeatureScotchgard protector Applicator Tool and Scotchgard Warranty Pretreating optional Before You CleanCarpet Cleaning Destroy the BladderSetting Back on once the object is removedAfter You Clean Emptying and Re-filling the Tanks. RemoveInside of the end caps by the brush rolls can be Before you place the cleaned Water Tank back ontoPost-Treatment Scotchgard Protector Optional After carpet is dry, vacuum again to remove hair FuzzRinse/Protect setting Suction as needed Cleaning With AttachmentsIf desired Coil Flex hose around the Tool CaddyStain Removal Cleaning Fluid Section48 oz. Bissell Fiber Cleansing 48 oz. BissellAttachment Setting on the Ready Tools Dial Bare Floor CleaningUsing the Bissell Tough Stain PreCleaner Be sure to test any spot removal formulas in anRepeat the motion without pressing the trigger Belt Removal and Replacement InstructionsSlowly move the machine forward and back over Allow approximately 30 minutes for floors to dryBrush Removal and Replacement Instructions Troubleshooting Set Ready Tools Dial to Hose Attachments SettingPlease do not return this product to the store M. 10 p.m. EST M. 8 p.m. EST203-6618 203-6651 Tough Stain Tool 203-6652203-6660 203-6685Replacement parts Bissell ProHeat Or Call Use the Customer Services tabWebsite or E-mail Or write
Related manuals
Manual 24 pages 41.32 Kb Manual 24 pages 2.93 Kb

9400, 9300, 8920 specifications

The Bissell 9200 and 9400 series are prominent models in the realm of carpet cleaning and home maintenance, designed to ease the burden of keeping your living space clean and fresh. These machines exemplify an innovative combination of advanced technology, essential features, and user-oriented characteristics that cater to a variety of cleaning needs.

The Bissell 9200, commonly known as the ProHeat 2X, boasts a robust design with unique characteristics aimed at deep cleaning carpets. One of its standout features is the built-in heater that helps maintain hot water temperatures during the cleaning process, enhancing the effectiveness of the cleaning solution. This ensures that dirt, stains, and allergens are effectively lifted from the fibers of your carpet, providing a deeper clean compared to standard methods.

Equipped with two large capacity water tanks, the Bissell 9200 facilitates longer cleaning sessions without the need for frequent refills. The separate tanks for clean and dirty water ensure that you are continually applying fresh cleaning solution while efficiently disposing of dirt. Additionally, the multi-surface cleaning capability allows for versatility, enabling users to clean carpets, upholstery, and stair surfaces with ease.

Transitioning to the Bissell 9400, or the ProHeat 2X Revolution, customers will find enhanced features and performance efficiency. It features a lightweight design, making it easier to maneuver around the house. The 9400 model also comes equipped with the "CleanShot" technology, which provides users the ability to pre-treat tough stains directly from the machine, delivering targeted cleaning power without additional mess.

One of the key highlights of the 9400 is its express clean mode that allows carpets to dry in approximately 30 minutes, a significant improvement over traditional steam cleaning methods. This quick-drying feature not only promotes convenience but also reduces the time required for carpets to be put back into use, making it ideal for busy households.

Both models feature a “Triple Action Brush Roll” that works during cleaning to loosen, lift, and remove embedded dirt in carpet fibers. Moreover, they come equipped with specialized attachments like the pet tool and upholstery tool, catering specifically to pet owners and those looking for additional cleaning versatility.

In summary, the Bissell 9200 and 9400 models are designed with practicality and efficiency in mind. They combine powerful cleaning capabilities, rapid drying features, and specialized tools to meet the diverse cleaning demands of any home, making them valuable additions to your cleaning arsenal.
Top Page Image Contents