Bissell 9400, 9300, 8920 warranty Rinse/Protect setting

Post-Treatment Scotchgard Protector (Optional)

Purge the hose to eliminate cleaning solution from 2

2.the tube by spraying clean water through the hose

without attachments into a sink for 15-30 seconds.

3.	Attach Scotchgard post-applicator cartridge to the
	Applicator Tool, following the instructions on the
	cartridge. Attach the combined Tool/Cartridge to
	the hose. The water from the 2-in-1 Tank will
	automatically mix with the concentrated Scotchgard
	post-treatment formula contained in the cartridge.
4.	Turn the Custom Clean Dial to the
	Rinse/Protect setting.
5.	Before applying Scotchgard protector to a large
	area, test in a small, hidden area for colorfastness.

Examine area when dry. If color is affected, do not use. For use on upholstery, look for manufacturer’s cleanability code tag. Use only on fabrics coded “W” or “WS”. If coded “S” or “X”, do not use. Not recommended for use on velvet, silk vinyl, leather, or 100% cotton upholstery.

Apply Scotchgard protector in a slow sweeping

6.motion with a slight overlap of the treated area. For best coverage, follow the guide on the cartridge.

One 8 oz. cartridge protects 200 square feet

7.(18.6 sq. meters). This is equal to two average size rooms, (each at 10 x 10 ft. or 3 x 3 meters). Periodically check the level in the bottle to ensure the best coverage.

Be careful not to spray the protector onto furniture

8.or fabric that has not been tested for colorfastness. If this does occur, wipe off the protector.

Remove the bottle from the spraying applicator tool.

9.If concentrate is left, replace the cap to the cartridge and store at room temperature for later use.

With the applicator tool still on the end of the

10.hose, spray clean hot water into the sink to avoid any future clogging.

Store tool in a convenient location for use the

11.next time.

Tip:

If clogged, soak applicator tool in hot tap water before using.

136