Bissell 9300, 9400, 8920 warranty Brush Removal and Replacement Instructions

Page 18

Brush Removal and Replacement Instructions

Brushes can be removed for cleaning or

2

replacement as desired.

 

3

1.

Follow Belt Removal Instructions on page 17.

Remove Brush Rolls by pulling them off of the

2. metal rods.

3.

Place Cleaned or New Brush Rolls back onto the

 

rods. Make sure one washer is on each end of

4

 

 

the rollers prior to sliding onto the rod. Be sure

 

 

to let the rod slide through the bushing to insure

 

 

proper fit.

 

4.

Re-attach the long belt on the bottom to the

 

cogs of the small roller brushes.

 

5.

Place small belt over back roller and metal cog.

6

 

6.

Place pivot arm in place and screw in place

 

using the Silver screw.

 

7.

Re-attach Clear End Cap by tightening with the

 

(2) Black screws.

 

8.

Return Front Nozzle to front of unit, be latching

 

from underneath and then securing with a screw.

8

 

 

If you have any questions or are

having trouble installing or replacing your belt(s) or brushes, please call BISSELL Consumer Services at 1-800-237-7691.

5

7

186

Image 18
Contents ProHeat Thanks for buying a Bissell ProHeat Important Safety Instructions Optional Accessories 16 oz. Bissell Wrap Power Cord and Flex Hose as shown How to Use this GuideHow To Put It Together Hose Secure LatchSpecial Features of Your Bissell ProHeat Built-in Heater FeatureScotchgard protector Applicator Tool and Scotchgard Warranty Pretreating optional Before You CleanCarpet Cleaning Destroy the BladderSetting Back on once the object is removedAfter You Clean Emptying and Re-filling the Tanks. RemoveInside of the end caps by the brush rolls can be Before you place the cleaned Water Tank back ontoPost-Treatment Scotchgard Protector Optional After carpet is dry, vacuum again to remove hair FuzzRinse/Protect setting Suction as needed Cleaning With AttachmentsIf desired Coil Flex hose around the Tool CaddyStain Removal Cleaning Fluid Section48 oz. Bissell Fiber Cleansing 48 oz. BissellAttachment Setting on the Ready Tools Dial Bare Floor CleaningUsing the Bissell Tough Stain PreCleaner Be sure to test any spot removal formulas in anRepeat the motion without pressing the trigger Belt Removal and Replacement InstructionsSlowly move the machine forward and back over Allow approximately 30 minutes for floors to dryBrush Removal and Replacement Instructions Troubleshooting Set Ready Tools Dial to Hose Attachments SettingPlease do not return this product to the store M. 10 p.m. EST M. 8 p.m. EST203-6618 203-6651 Tough Stain Tool 203-6652203-6660 203-6685Replacement parts Bissell ProHeat Or Call Use the Customer Services tabWebsite or E-mail Or write
Related manuals
Manual 24 pages 41.32 Kb Manual 24 pages 2.93 Kb

9400, 9300, 8920 specifications

The Bissell 9200 and 9400 series are prominent models in the realm of carpet cleaning and home maintenance, designed to ease the burden of keeping your living space clean and fresh. These machines exemplify an innovative combination of advanced technology, essential features, and user-oriented characteristics that cater to a variety of cleaning needs.

The Bissell 9200, commonly known as the ProHeat 2X, boasts a robust design with unique characteristics aimed at deep cleaning carpets. One of its standout features is the built-in heater that helps maintain hot water temperatures during the cleaning process, enhancing the effectiveness of the cleaning solution. This ensures that dirt, stains, and allergens are effectively lifted from the fibers of your carpet, providing a deeper clean compared to standard methods.

Equipped with two large capacity water tanks, the Bissell 9200 facilitates longer cleaning sessions without the need for frequent refills. The separate tanks for clean and dirty water ensure that you are continually applying fresh cleaning solution while efficiently disposing of dirt. Additionally, the multi-surface cleaning capability allows for versatility, enabling users to clean carpets, upholstery, and stair surfaces with ease.

Transitioning to the Bissell 9400, or the ProHeat 2X Revolution, customers will find enhanced features and performance efficiency. It features a lightweight design, making it easier to maneuver around the house. The 9400 model also comes equipped with the "CleanShot" technology, which provides users the ability to pre-treat tough stains directly from the machine, delivering targeted cleaning power without additional mess.

One of the key highlights of the 9400 is its express clean mode that allows carpets to dry in approximately 30 minutes, a significant improvement over traditional steam cleaning methods. This quick-drying feature not only promotes convenience but also reduces the time required for carpets to be put back into use, making it ideal for busy households.

Both models feature a “Triple Action Brush Roll” that works during cleaning to loosen, lift, and remove embedded dirt in carpet fibers. Moreover, they come equipped with specialized attachments like the pet tool and upholstery tool, catering specifically to pet owners and those looking for additional cleaning versatility.

In summary, the Bissell 9200 and 9400 models are designed with practicality and efficiency in mind. They combine powerful cleaning capabilities, rapid drying features, and specialized tools to meet the diverse cleaning demands of any home, making them valuable additions to your cleaning arsenal.