Operations
Getting ready continued
2.Fill the water tank
A.Remove tank by lifting straight up and away from unit.
B.Unscrew cap at bottom of water tank and remove the insert assembly.
C.Fill water tank with water. For best results, water should be at room temperature.
D.Replace insert assembly and cap, tighten until snug.
E.Replace water tank by lining up vertical guides and gently sliding tank into place.
3.Twist the quick release cord wrap clockwise to unwrap the power cord com- pletely and plug into a 1 proper
outlet as described on the Important Safety Instructions, page 3.
4.The ready light will illuminate when the Healthy Home Steam Mop Max is ready for use.
Before you clean
Thoroughly sweep or vacuum floor prior to cleaning with the Healthy Home Steam Mop Max.
Cleaning hard floors
Your Healthy Home Steam Mop Max is designed to clean hard flooring such as ceramic tile, vinyl, laminate, marble, stone and sealed hard wood floors. Use of your Healthy Home Steam Mop Max on waxed or some unwaxed floors may result in a diminished glossiness. The Healthy Home Steam Mop Max is not for use on unsealed wood floors. For best results test in an inconspicuous area and check the care instructions from your flooring manufacturer.
1.When the ready light illuminates, begin cleaning by slowly passing over surface while pressing the steam on demand trigger to emit steam as needed.
NOTE: The trigger does not need to be depressed at all times for Healthy Home Steam Mop Max to work satisfactorly
2A2B
2E
Warning:
Never put descaling, aromatic, alcoholic, or detergent products into the steam cleaner, as this may damage it or make it unsafe for use.
CAUTION:
The Healthy Home Steam Mop Max generates hot steam, so when depressing the trigger to apply steam, ensure the Healthy Home Steam Mop Max is mov- ing continuously. Prolonged application of steam in one area increases the risk of dam- age to the surface treatment of timber floors.
7
w w w . b i s s e l l . c o m