Unigreen 32 2.5WEATHER CONDITIONS, 2.7DRIVING ON THE ROAD, 3CHARACTERISTICS AND SPECIFICATIONS

Refer to the enclosed handbooks for the use and maintenance of the pump and pressure regulator and any accessories or motors.

b)Please contact the agent in your zone, the nearest authorised workshop or UNIGREEN S.p.A. directly for any repairs the user feels they aren’t capable of performing alone. (see point 8.5)

c)Due to the complexity of the equipment and the variety of technologies used (mechanical, hydraulic, oil-pressure and electrotechnical) operators must not dismantle or modify the equipment. All of the relevant operations must be performed by specialised personnel, authorised by UNIGREEN S.p.A.

2.4.1TAKING PRECAUTIONS AGAINST FIRE HAZARDS Don’t use naked flames or heat sources near the machines.

The sprayers are made with many materials that derive from petroleum: tanks, tubes, pipes and hoses, wheels and plastic parts; furthermore the presence of oils of various nature and residues of chemical products make them potentially flammable.

2.5WEATHER CONDITIONS

We recommend spraying in the early hours of the morning or late in the afternoon, avoiding the hottest time of day.

Never do any spraying if it’s raining or rain is forecast.

Don’t spray in strong wind or in any case, in winds above 3/5 m/second.

If you have to spray in windy conditions, use relatively low pressures to obtain quite large drops that are less sensitive to drifting (being heavier the wind has less effect). There are also special anti-drift nozzles available from UNIGREEN S.p.A.; for information, please contact our offices.

2.6MACHINES DESIGNED TO BE USED ONLY WITH CLEAN WATER

There are versions of the machines designed only to be used with a hose reel for washing with cold clean water.

These machines cannot be used with chemical products as they don’t have some of the devices or accessories that are needed to use these products safely. These machines are identified by the word “washing” on the CE plate.

2.7DRIVING ON THE ROAD

The CAMPO series atomisers are not specifically designed for road use. Nevertheless, many models are also available in the version homologated for road traffic with the tank empty.

You should check with your local reseller on the correct couplings to use and use tractors that meet the regulations in force.

3CHARACTERISTICS AND SPECIFICATIONS

This handbook is valid for tractor-mounted sprayers to be used with:

a)horizontal booms per herbaceous cultivations (herbicides, insecticides, fungicides, foliage nutrient, etc.)

d)treatments with hand lances with or without a hose reel

e)hand lances for washing with or without a hose reel

The UNIGREEN S.p.A. sprayers are identified by the CE plate (FIG. 2) bearing one of the marks indicated in the tables of the allowed fittings (TABLE N° 12 pag. 33-34). The tables above contain a summary of the indications envisaged for the markings.

3.1TABLES OF FITTINGS ALLOWED

Table N° 12 let you identify the version of your machine indicating the basic equipment and all the possible fittings available (optional).

You can also find the other fittings allowed or other versions to meet your require- ments in the future.

THE FITTING DEFINED IN TABLES N° 12 (pages 33-34) SHOULD BE CONSID-

ERED BINDING FOR THE VALIDITY OF THE DECLARATION OF CONFORM- ITY.

Other fittings or setups of basic components and optionals should be considered unsafe and therefore are not covered by the guarantee and aren’t UNIGREEN’s responsibility.

The same goes for fittings realised with components or accessories that aren’t original UNIGREEN parts.

UNIGREEN accessories can easily be identified by the label with the yellow background “ORIGINAL UNIGREEN ACCESSORY”

TYPE :
code:		N˚
massa a vuoto:	Kg.	max press. :	bar
net mass
massa totale ammessa:		Kg.
total mass		ANNO
		YEAR
		20
		made in
via Rinaldi, 105 - Reggio Emilia ITALIA		Italy

FIG. 2

unigreen 7