Maintenance and care
When you're done
1.Unplug power cord from outlet.
2.Carefully remove mop pad from swivel head, as mop pad and lower assembly will be hot.
3.Any water remaining in the water tank should be emptied prior to machine storage.
4.Mop pad can be machine washed in warm water. Use only liquid detergants. Do not use bleach or fabric softeners, For best results, air dry.
5.Wrap power cord around quick release cord wrap on side of Healthy Home Steam Mop Max.
6.Wipe all surfaces of Healthy Home Steam Mop Max with a soft cloth. Store upright in a protected, dry area.
NOTE: If steam output is reduced, the nozzle may be blocked. To remedy, unplug unit and allow to cool. Once cooled, remove swivel head from lower body and pour vin- egar through center tube of swivel head “neck”. Clear nozzle by insert- ing a paper clip into the brass spray tip located in bottom of lower body.
CAUTION:
Upright storage of the Steam Mop with a wet mop pad may result in the formation of white marks on your floor. To remove the white marks, clean area with vinegar.
Brass Spray Tip
Swivel Head Neck
Replacing the water purification system
If you fill your Healthy Home Steam Mop Max cleaner with normal tap water, it is essential to check the water purification system and replace it when it is no longer effective. Change the filter when the bright green grains turn blue. If the filter is not changed at the appropriate time, calcium deposits will accumulate on the heating element, causing damage or reduced performance.
Using distilled or demineralized water will maximize the performance of your filter.
To order a replacement water purification system refer to the replacement parts section on page 10.
Tip:
Using distilled or demineralized water will maximize the performance of your filter.
Tip:
Be sure to use only a BISSELL water filter in your Steam Mop.
9
w w w . b i s s e l l . c o m