Bissell 7950 warranty Bare Floor Cleaning Technique, Routine Maintenance

Page 17
Turn Power and SmartTemp switches OFF ( O ).
Unplug power cord from the outlet .
Coil Flex Hose around storage brackets on the Tool Caddy.
Coil Power Cord around Power Cord Quick Release.
Remove and rinse tools in clean, running water. Dry and replace on tool caddy.
Remove Tank-In-Tank, dispose of dirty water. See Features section, pages 7-9.
Rinse out Tank-In-Tank and replace on the machine; Clean out lint trap.

Bare Floor Cleaning Technique

 

 

 

Slowly move the machine nozzle with Bare Floor Tool

1.

 

forward and back over soiled surface one time while

 

 

 

pressing the Trigger. Caution: Do not over wet.

 

 

 

 

 

Repeat the motion without pressing the Trigger using the Bare

2.

 

Floor Tool to squeegee and suction up the dirty water.

 

 

 

Repeat steps 1 and 2 backing along the exit path.

3.

 

 

 

Allow about 30 minutes for the floor to dry completely.

4.

 

 

 

 

When the cleaning job is complete, refer to the

5.

 

 

Maintenance/Storage section on pages 17-20.

6.

 

To remove Bare Floor Tool gently bend long tab (right side)

 

outward and pull tool down away from nozzle. Rinse

thoroughly, dry and store

Routine Maintenance

1.

2.

3.

4.

5.

6.

7.

Clean out the Flow Indicator Filter each time it is used to ensure

8. best cleaning performance. Unscrew the Flow Indicator Cap, lift out the red rotor and white filter. Rinse all 3 parts in tap water. Replace the filter with the post facing upward. Replace the rotor. Replace the Flow Indicator Cap; turn until snug, do not over-tighten.

 

 

 

Wipe all exterior surface with a soft cloth.

9.

 

10.

Store cleaner upright in a protected, dry area.

Note: ProHeat uses water and must not be stored

where there is a danger of freezing. Freezing will damage internal components and void the warranty.

When carpet is dry, vacuum again to remove hair and fuzz

11. that the ProHeat may have loosened.

WARNING:

To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.

Tip:

SmartMix Bottle may be stored with concentrate ready for your next cleaning job. Make sure dial is turned to the Water Rinse/ Carpet Protector Setting when storing.

D

Cap

Rotor

Filter

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents ProHeat Thanks for buying a Bissell ProHeat Self Propelled Important Safety Instructions ReadyTools 4 Upholstery Tool Tough Stain Brush Tough Stain PreCleanerFormula with How to Put It Together How to Use This GuideRefer to Assembly Diagram on ProHeat assembly is now completeWill not allow it to exceed SmartTemp Ready Light indicates when the heater isPush the handle slightly forward to engage SmartMix DirtLifter PowerBrushReplace the valve cap turning until snug Replace SmartMix concentrate TankLid Tank-in-TankFlow Indicator When It’s Time to Empty Tank-in-TankFinal cleanup ReadyTools DialFloor Cleaning Before You Clean CarpetsOperation Machine PreparationCleaning Formula Carpet CleaningSolution or water only Result in premature belt failureNot use a knife or other utensil with sharp edges Stain RemovalResidue with a sweeper or vacuum When You’re Done AssemblyTurboBrush UseScotchgard protector Applicator Optional Immediately after cleaning and rinsing your carpets, emptyFlush water through the hose to eliminate cleaning solution May bleed through fabric when wet Cleaning TechniqueImportant Check Upholstery Tags Set SmartMix Dial to NormalAttach the Bare Floor Tool Cleaning Bare FloorsFloor Cleansing Formula in the SmartMix Tank Wipe all exterior surface with a soft cloth Bare Floor Cleaning TechniqueRoutine Maintenance Turn the machine OFF 0 and unplug from the wall outlet Pump Belt ReplacementLocate and remove broken pump belt Step on the Handle Release and recline the handle down ontoAssembly is now complete To Install the Replacement Pump BeltPlace the black brush arm onto the brush and slide black See illustrationClean out Flow Indicator Filter, TroubleshootingPossible Cause RemediesPossible Causes Possible Causes RemediesAm 10 pm ET Bissell Consumer ServicesItem Part No Part Name Warranty
Related manuals
Manual 24 pages 1.55 Kb

7950 specifications

The Bissell 7950, also known as the Bissell PowerForce Helix, is designed to provide a powerful cleaning experience for those looking to keep their home spotless. This vacuum cleaner combines efficiency with innovative technologies, making it an excellent choice for tackling everyday dirt and debris.

One of the standout features of the Bissell 7950 is its Helix Cleaning System, which utilizes a unique dual-cyclonic dirt separation technology. This system ensures that dirt and dust are separated effectively, providing consistent suction power throughout your cleaning tasks. The Helix design helps to maintain performance, even as the dirt bin fills, ensuring that users do not need to worry about performance decline, a commonplace issue with many vacuum models.

The Bissell 7950 comes equipped with a lightweight frame, making it easy to maneuver around your home, whether you're navigating through rooms or carrying it up stairs. Its compact design does not compromise the power, offering a robust motor capable of handling various surfaces, including carpets, upholstery, and hard floors. Users will appreciate the adjustable height settings that allow for tailored cleaning on different surface types, ensuring that each area receives the cleaning it requires.

Moreover, the vacuum features a large, easy-to-empty dirt cup, minimizing mess during disposal. This feature is complemented by a washable filter, promoting sustainability and reducing the need for frequent replacements. This not only helps in maintaining suction power but also cuts down on maintenance costs.

Another significant characteristic of the Bissell 7950 is its set of specialized attachments. The vacuum includes a crevice tool, dusting brush, and upholstery tool, making it versatile for various cleaning tasks around the house. These tools allow users to reach into tight spaces, dust delicate surfaces, and clean furniture with ease.

In terms of design, the Bissell 7950 sports a modern aesthetic with intuitive controls that simplify the user experience. The power cord is sufficiently long, providing users ample reach without constantly needing to switch outlets. Additionally, the vacuum's cord rewind feature adds convenience, allowing for quick storage.

In summary, the Bissell 7950 PowerForce Helix is a dynamic and versatile vacuum cleaner that adeptly combines advanced cleaning technologies with user-friendly features. Its efficient Helix Cleaning System, lightweight design, specialized attachments, and easy maintenance make it a formidable opponent against dirt, dust, and allergens in any household. This model is an excellent investment for those seeking both power and versatility in their cleaning equipment.
Top Page Image Contents