Pump Belt Replacement
1.
2.
3.
2
Turn the machine OFF ( 0 ) and unplug from the wall outlet.
Step on the Handle Release and recline the handle down onto | 3b |
floor. (see illustration). | 3a |
|
Remove
Remove Belt Access Door located near the Floor Cleaning/
4. Tools switch by inserting a flat head screwdriver into the slot nearest to the handle and gently prying the access door off (see illustration).
Turn the machine onto its side so the belt access area is
5. facing upward (see illustration).
On the bottom of the machine, near the belt access area,
6. is a red retainer plate that holds the black brush arm and brush in place. Using a Phillips head screwdriver remove the screw that holds the red retainer plate in place. Set red retainer plate and Phillips head screw aside (see illustration).
Remove the black brush arm that holds the brush in place. Set
7. the black brush arm aside (see illustration).
4
5
6
8.
9.
7
Remove the “toothed” brush belt from the brush then from the red pump pulley. Set the “toothed” brush belt and brush aside.
Locate and remove broken pump belt.
8
9
18