FEATURES
OPERATING INSTRUCTIONS
Your Steam Mop utilizes steam to remove tough grease,dirt and grime. Steam is nature’s purest and most powerful cleaner for safely cleaning all hard floor surfaces in your home without harsh chemicals, thus being perfectly ecological. Cleans your tile, hardwood , linoleum and vinyl floors.
WARNING: Your Steam Mop is designed to clean hard floor surfaces that will withstand high heat. Do not use on unsealed wood or unglazed ceramic floors. On surfaces that have been treated with wax or some no wax floors, the sheen may be removed by the heat and steam action. It is always recommended to test an isolated area of the surface to be cleaned before proceeding. We also recommend that you check the use and care instructions from the floor manufacturer.
IMPORTANT: Never leave the appliance in one spot on any surface for any period of time. Always place the appliance on the floor protector pad and make sure that the appliance is turned off.
CAUTION: Use a grounded receptacle. Use only a heavy duty extension cord rated for 15 amps minimum - Do not use an ordinary extension cord.
IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this appliance.
Use regular water or distilled/purified water if the tap water in your area is very hard.
How To Assemble & Use
IMPORTANT: Always insure that the unit is “UNPLUGGED” from the wall receptacle prior to initial filling and before attaching the
Always let unit cool for at least 5 minutes before removing the
1.Remove all the parts from the packaging.
2.Insert the ergonomic handle into the tube pivot of the main unit.
3.Place one of the micro fiber cleaning cloths or bonnet (optional) on the bottom of the steam mop. Make sure that the
4.Place the steam mop on the floor protector pad and open the filling cap.
5.With the help of the filling flask, pour 1 cup of water (8 oz.) Into the unit. do not overfill.. Replace filling cap when finished. (Fig. 2)
Fig. 1
Fig. 2
6.Plug the unit into a standard 120 volt grounded wall receptacle.
7.Press the On/Off button to turn the unit on. The power ‘On” light will light up. It takes the unit approximately two - three
8.When there is no more water in the water tank, the empty light (red) will go on.
9.To refill the water tank, turn the unit off and unplug from the electrical wall outlet and let the unit cool for 30 seconds. Then remove the filling cap and pour in the water. You do not have to wait for the unit to cool down before you refill.
10.When you have finished using the steam mop, turn the unit “Off” and wait until the steam mop cools down for approximately five (5) minutes before removing the
11.Never leave the
WARNING: Colors may bleed during first wash. Be careful when machine washing or drying with mixed fabrics as
Using The Micro-Fiber
Bonnet (Optional)
4
If you wish to use the
5