Euro-Pro S3305H Operating Instructions Getting to Know Your Steam MOP, Care & Maintenance

OPERATING INSTRUCTIONS

GETTING TO KNOW YOUR STEAM MOP

Care & Maintenance

IMPORTANT: Always insure that the unit is “UNPLUGGED” from the wall receptacle prior cleaning or before emptying the water tank.

1.Turn the unit off and unplug from electrical outlet.

2.Wrap power cord around cord holders.

3.Let the unit cool for five (5) minutes before removing the micro-fiber cleaning cloth or bonnet (optional) and before emptying the water tank.

4.Always empty the water tank when you have finished using the unit.

5.Never leave the micro-fiber cleaning cloth or bonnet (optional) on the unit when you have finished using the steam mop. Always remove the micro-fiber cleaning cloth or bonnet (optional) and wash in warm water with a mild detergent. Never use bleach or fabric softener when cleaning the micro-fiber cleaning cloth. The micro-fiber cleaning cloth or bonnet (optional) can be washed in a washing machine and dried in a clothes dryer but on low heat. We recommend that you air dry for 24 hours but it could also be dried in a clothes dryer on a low heat setting.

6.Wipe the unit with a damp cloth to clean. Never immerse main unit in water or any other liquid.

7.In order to keep your steam mop in good condition, we recommend that you clean the water tank once a month to eliminate calcium deposits. Add three ounces (3 oz) of water to the water tank and shake to loosen any deposits. Remove the filling cap and immediately empty water into a sink. Do not use vinegar or other

decalcifying substances in the steam mop water tank.

Caution: Do not immerse the unit in water or any other liquids.

Helpful Hints

1.Always vacuum or sweep before steam cleaning.

2.The easiest way to use the machine is to tilt the ergonomic handle to a 45° angle and clean slowly 2-3 yards at a time.

3.Hand wash or machine wash the micro-fiber cleaning cloths or bonnet (optional) in a delicate cycle with a mild detergent.

4.We recommend air drying the micro-fiber cleaning cloths or bonnet (optional) for 24 hours, but they could be dried in a dryer on a low heat setting.

5.A good amount of steam passes through the micro-fiber cleaning cloth. We recommend that the cleaning cloth be changed when it gets too wet. These need to be replaced as necessary.

6.To remove stubborn stains from vinyl or linoleum floors, pre-treat with a mild detergent and some water before using the steam mop.

IMPORTANT:

Never leave the steam mop in one spot for any period of time. Always place the appliance on the floor protector pad and make sure that the appliance is turned off.

1.	Hand Grip	9.	Tube Pivot
2.	Power Cord	10.	Cord Holder
3.	2-Piece Ergonomic Handle	11.	Micro-Fiber Cleaning Cloth (x2)
4.	Filling Cap	12.	Floor Bonnet (Optional)
5.	Main Unit	13.	Filling Flask
6.	On/Off Button	14.	Floor Protector Pad
7.	Power “On” Light (Green)	15.	Handle Joint

8.Empty Light (Red)

Technical Specifications

Voltage:	120V., 60Hz.
Power:	800 Watts
Water Capacity:	8 U.S. Fl. Oz.(250ml)

Note: Illustrations may differ from actual unit.

6

3