Avanti BCAD680 Care And Maintenance, See figure AA FIG AA, ?Replacing Your Fluorescent LightNOTE

Models: BCAD680

1 19
Download 19 pages 52.31 Kb
Page 11
Image 11
See figure "AA"

?When removing any of these shelves out of the rail compartment, you must first disassemble and remove both of the plastic posts after removing the Phillips screws that holds each post in place.

See figure "AA"

FIG "AA"

CARE AND MAINTENANCE

?Replacing Your Fluorescent Light NOTE:

All parts removed must be saved to do the replacement of the fluorescent light.

Before removing the fluorescent light, either turn off the appliance or disconnect the electricity leading into the appliance at the main power supply. Failur e to do so could result in electrical shock or personal injury.

?Turn off the fluorescent light switch .

?Pull down to remove the fluorescent light cover (3) softly.

?Rotate the fluorescent light (2) 90° and pull down softly to remove it from the light holder (1).

?Replace with a T-5 fluorescent light that is the same shape and size.

?Replace the light cover (3).

1.Light Holder

2.Fluorescent Light T5 (8 W atts)

3.Light Cover

?Cleaning Your Beverage Center

?Unplug the appliance, and remove all items including shelves.

?Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.

11

Page 11
Image 11
Avanti BCAD680 instruction manual Care And Maintenance, See figure AA FIG AA, ?Replacing Your Fluorescent LightNOTE