Honeywell 5828/5828V manual General Information, 5828V Keypad with Front Cover Removed, Sounder

K0021V2 2/06 Rev. A

ADEMCO 5828/5828V

Wireless Bidirectional Fixed-Word Keypads

USER GUIDE

GENERAL INFORMATION

The ADEMCO 5828 and 5828V are wireless keypads that can be used to operate and get status from your security system. The 5828 and 5828V have the following features (voice annunciation features apply only to the 5828V):

•Can be used to arm/disarm, and perform other system operations.

•Can display and/or annunciate system status.

•Can automatically display and/or annunciate a change in system status if AC powered (e.g., for an alarm, the keypad will announce the type of alarm (fire or burglary) and location (e.g. kitchen window).

•The 5828V Message Center can be used to record and play back a voice memo to yourself, or leave a message for a family member.

•Can be battery- or AC-powered (AC-powered units have several advantages, described below).

Battery-Powered Operation: When powered by battery, the keypad must first be activated by pressing any numbered key. The keypad will display the current system status within a few seconds. You may at any time before or after receiving status, arm, disarm, send a panic alarm, or perform other system operations. The keypad becomes inactive when no keys have been pressed for 15 seconds, and must be reactivated to display the current status.

AC-Powered Operation: When powered by the optional AC adapter, the keypad remains active at all times. If AC power is lost, the keypad reverts to battery-powered operation until AC power is restored and a new status request is made ([✱] key).

NOTE: Whether the unit is powered by battery or AC, the 5828/5828V may take a few seconds to display and/or annunciate the new status after pressing the [✱] key.

BA	ARMEDREADY	RECORD1 FF	VOLUME2 AWAY	3PLAYSTAY MESSAGEMIC	ONLY5828V
		4 MAX	5 TEST	6 BYPASS
		7 INSTANT	8 CODE	9 HIME
C		STATUSREADY	0VOICE	FUNCTION#
D					5828V-00-006-V0

5828V Keypad with Front Cover Removed

KEYPAD KEYS

These keypads include 12-operational keys, as well as four Special Function keys that are backlit for ease of use when the keypad is active. To access the keypad keys, simply open the swing-down door by applying outward pressure on the door release slot on the right side.

Panic alarms are activated by pressing the key pairs shown in the table below. Special Function keys A, B, and C, can be programmed by your installer to provide the same alarms by pressing a single key and holding it down for 3-seconds, or can be assigned other system operations. (Ask your installer to fill in the tables below with assigned functions of these keys).

Key		Function
Pairs	Function	Keys	Function
[1] & [✱]		A
[✱] & [#]		B
[3] & [#]		C
		D

SOUNDER

The keypad’s built-in sounder pulses three times and then pauses (repeatedly) for fire alarms, and generates a continuous two-tone sound for burglary alarms.

HOW TO GET SYSTEM STATUS

When Powered By Battery

Pressing any key will turn on the keypad. However, to specifically request system status from the control, simply press the [✱] key. Status will be displayed within a few seconds.

When Powered By AC Power

On AC powered units you can get the status by viewing the display. The keypad is automatically updated when a change in system status takes place (arming, disarming, trouble, etc.).

HOW TO PROGRAM OR CHANGE YOUR 4-DIGIT SECURITY CODE IF USING QUICK KEY FUNCTIONS

In order to Quick Arm the system using this keypad, you will need to program your own 4-digit security code into the keypad. This code must match a code that has already been programmed into your control panel. To program the 4-digit code, perform the following steps:

1.Press the 7 INSTANT and 9 CHIME keys at the

same time until the display flashes double dashes (- -), then release.

2.Enter the 4-digit security code that matches a valid user code already programmed into your control panel. Do NOT use the Duress Code. There will be no display of the numbers you pressed.