Hoover Shampoo-Polisher manual Maintenance, To achieve a high lustre finish, Splash guard

To achieve a high lustre finish

1.Attach felt buffing pads over scrubbing-waxing-polishing brushes using fasteners. Polish to a soft shine by guiding shampoo polisher in straight lines or with the grain of the wood. If more shine is desired proceed to step 2.

2.Remove felt buffing pads and attach high lustre polishing pads (available at additional cost). Once again, guide the handle in straight lines or with the grain of the wood to achieve a high lustre finish.

,’

’

:

To keep floors bright and shiny v

Floor should be buffed frequently to restore sheen and remove scratches and marks. This lengthens the time between waxings. Before buffing, use a vacuum cleaner to remove dust and dirt and damp cloth to remove sticky particles. Stubborn spots, such as black heel marks, can be removed by rubbing gently with very fine steel wool dampened with wax.

If traffic areas need to be rewaxed and polished, and a solvent-base wax

has been used on the floor, apply wax only to these areas then buff the ,. entire floor.

Maintenance

The following section is concerned with proper maintenance. Familiarize . . yourself with-these home maintenance tasks and keep this owner’s manual in a convenient place where you can refer to it when needed. Proper use and care will assure continued cleaning effectiveness.

Splash guard

Wipe splash guard with dry cleaning fluid or liquid soap to remove wax and dirt after each use.

Tank and tubing

Wash and rinse tank after each use. Occasionally unscrew the cap on the bottom of the tank and rinse cap with clear water to prevent clogging of the opening. Remove tubing occasionally to wash and rinse.

15