Floor WAX | Hoover Shampoo-Polisher instruction

FLOOR

WAX

Solvent

Base

There are two kinds of solvent- base wax: paste wax and liquid polishing wax.

Paste wax

To spread wax evenly, attach scrubbing-waxing-polishing brushes to shampoo-polisher and snap on cleaning-waxing pads.

Spread a thin coat of wax on pads or spread a small amount on floor with spatula. Start by press- ing handle release lever and lowering handle. Apply wax to floor, by guiding in straight lines or with grain of the wood, until the wax is spread evenly.

Cleaning, polishing wax

This type of wax is used to clean as well as wax floors. Apply wax according to instructions on the container. Use the shampoo- polisher only to polish floors when this type of wax is used. Refer to section “Cleaning floors -Solvent cleaning wax method”.

Polishing and buffing floors

Floors waxed with solvent-base wax may be polished and buffed with the shampoo-polisher.

1.Be sure wax is thoroughly dry before polishing. This usually takes 20-30 minutes but may take longer in damp weather.

2.Use scrubbing-waxing- polishing brushes to polish floor. Press handle release and start by lowering handle. Guide the shampoo-polisher in straight lines or with the grain of the wood.

3.A double coat of wax will give floors more protection. Let wax dry thoroughly and polish after each application.