Philips LX8000SA manual Setting the sound

Page 16
Setting the sound

Eng li

16:9

sh

(Wide screen)

 

4:3 LB (Letter Box)

4:3 PS (Pan Scan)

Note:

– The format you select must be available on the disc. If it is not, the settings for TV Shape will not affect the picture during playback.

öBlack level shift (NTSC output only)

Select On if you set the DVD system to NTSC and you are playing NTSC-compatible DVDs. This will improve the colour contrast and picture.

öVideo shift

Use this setting to move the picture on your TV to the left or right. The default setting is in the centre.

öColour settings

You can select one of the predefined sets of colour settings: Personal, Rich, Natural, Soft or Animation..

öPersonal colour

It allows you to define your own set of colour settings by adjusting : Saturation, Brightness and Contrast. Use 34 keys to adjust the values of these settings, then press OK.

öTV System (NTSC/PAL conversion)

This setting is applicable only if you used the CVBS or SCART jacks to connect the DVD system to a TV. Select the colour system that matches the connected TV.

You do not need to change the setting if your TV is PAL-compatible. The factory default setting is PAL. It will change the video signal of a NTSC disc and playback in PAL format.

If your TV is compatible with both NTSC and PAL, select AUTO.

If your TV is NTSC-compatible,

select NTSC. It will not support the PAL format DVDs and playback of a PAL DVD is not possible.

Note:

– Slight picture distortions may occur due to this conversion. This is normal.

Setting the sound Manual background

 

1en

1en

1

st

 

 

 

 

 

 

 

 

Digital output

 

All

 

 

 

Analogue output

 

 

 

 

Stereo

 

 

 

Night mode

 

 

 

 

 

 

On

 

 

 

Karaoke vocal

 

 

 

 

 

 

Off

 

 

 

 

 

 

 

 

 

Speakers

 

Settings...

 

 

 

PCM output

 

 

 

 

 

 

48 KHZ

 

 

 

 

 

 

 

 

öDigital output

Digital output lets you specify the type of digital output available with the other equipment connected.

Select All, if you have connected the DVD system’s DIGITAL OUT jack to an equipment that has a multichannel decoder.

Select PCM only (default setting), if the other equipment is not capable of decoding multichannel audio.

Select Off to deactivate the digital output.

Note:

– You cannot hear the SACD or MP3-CD playback if you use the digital connection.

öAnalogue output

Select Stereo, 3D sound (TruSurround) or Multi-channel to match your DVD home cinema system’s playback capability.

This function can also be accessed via the SURROUND button on the remote control.

14PREPARATIONS

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DVD VIDEO DIGITAL SURROUND SYSTEM DVD HOME CINEMA SYSTEMLX8000SA LX7000SAHook Up Guide LX8000SA LX7000SAHelpful Hints frontQuick Use Guide öPlaying a discItalia Important NoteNorge Index VARNING Contents Introduction and General Information Sleep TimerPlayer zone Additional Equipment ConnectionsFunctional Overview Top and Front panels1 2 3 4 2 5 6 7 @# $ %Remote Control Connections MW Indoor Loop AntennaFM Indoor Antenna FM Outdoor AntennaConnecting the speakers If your TV has a SCART input connectorIf your TV has a S-Videoinput connector glisAnalogue audio connections Digital audio connectionsReplacing the centre speaker with the TV For listening to the other equipmentPreparations Setting up the surround sound systemSetting up the subwoofer Inserting batteries into the remote controlSwitching on the system NTSC/PAL settingSystem Setup DVD To enter System Setup menuSetting the sound Setting the features Setting the languageEngli Access Control To enable disc playback after it has been lockedTo disable disc playback To lock/unlock the disc for viewingParental level DVD Change Country DVDChange Code DVD/VCD Rating explanationsBasic Functions When playing a DVD/VCD, selectTo listen through the headphones To switch off the volume temporarilyOperations Discs informationBasic playback To interrupt playbackFast Search Skipping to another track/chapterTo go directly to any track/chapter Access to the menu bar Changing subtitle language DVDChanging audio language Changing speaker surround outputSearching for a particular passage Viewing from another angle DVDZooming in Moving to another title/chapterTo set up an FTS programme, access the FTS menu Checking the contents of a DVDFavourite Track Selection - FTS To store titles/tracksTo cancel the repeat mode Playback Control PBCText information Supported MP3-CDformatRadio Reception First time setup/power upTo reinstall the Plug and Play To exit the Plug and PlayClock/Timer Clock settingTo exit without storing the setting Radio ReceptionClock/Timer Deactivating the timerTo change the preset sleep timer To deactivate the sleep timerSpecifications E n g l i s hTroubleshooting ProblemSolution E n g l i s h
Top Page Image Contents