Philips LX8000SA manual Quick Use Guide, öPlaying a disc

Quick Use

Guide

Make sure your DVD system and TV are connected and turned on!

öTurning on the power and listening to preset radio stations

1 “AUTO INSTALL- PRESS PLAY” will appear on the display. If not, press and hold ÉÅ on the system. 2 Press ÉÅ on the system again to start installing all available radio stations.

3 Once completed, the last tuned radio station will play. Press 1 2 to select a preset radio station.

To tune to a non-preset radio station, press S T briefly and repeatedly.

öPlaying a disc

1 With the DVD system’s power on, press DISC on the remote control.

2 Turn on the TV power and set to the correct Video In channel or

Audio/Video mode. The DVD system’s screen saver will show on the TV.

The TV’s Video Input channel may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT 1 or EXT 2, etc. These channels are often near channel 00. See your TV manual for details.

OPEN/CLOSE

3 Press OPEN/CLOSE on the system and load a disc, then press OPEN/CLOSE again to close

the disc tray.

4 Playback will start automatically. If not, press ÉÅ.

If a disc menu appears, use 3 4 1 2 to make the necessary selection, then press OK. Or, use the numeric keypad on the remote control to select features. Follow the instructions given on the disc menu.

5 During playback, you are able to change certain operations or features (for example, change the subtitle language, play in slow motion speed, etc.). Press SYSTEM MENU on the remote control, then use 3 4 1 2 to select your preferred options and press OK to confirm. To remove the menu bar, press SYSTEM MENU again.

Please refer to the owner’s manual “Special DVD/VCD features” for more information.

6 To stop playback, press Ç.

Region Codes

DVDs must be labeled for ALL regions or for Region 2 in order to play on this DVD system.

öPlaying other equipment connected to your DVD system

DISC

SYSTEM

MENU

1 2 3 4

OK

ALL 2

1

2

To use your DVD system’s home cinema surround capabilities, connect other

equipment and select the correct input source.

Please refer to the user’s manual “Connecting Additional Equipment” for more information.

Turn on and/or press PLAY on the equipment to start playback.

If necessary, connect the Video Output of the connected equipment (VCR or laser disc player) to TV for viewing purposes.

	Connect ...	Select input source
		from the remote
LX7000SA /		control
LX8000SA
	CD Recorder	➜ Press	AUX/DI
DIGITALIN	➜ "DIGITAL OUT"		to select "DI".
AUX	VCR /		AUX/DI
IN
	Laser disc player
		➜ Press	to select "AUX".
	➜ "AUDIO OUT"
TV	Televeision		TV/AV
IN		➜ Press
	➜ "AUDIO OUT"		.

Detailed playback features and additional functions are described in the

accompanying user’s manual.