Philips LX8000SA manual Specifications, E n g l i s h

Specifications

E n g l i s h

AMPLIFIER SECTION

Output power
LX8000SA	5 x 35 W RMS
LX7000SA	5 x 30 W RMS
Total Harmonic Distortion	10% at rated power (1 kHz)
Frequency Response	100 Hz – 30 kHz / ±3 dB
Signal-to-Noise Ratio	> 65 dB (CCIR)
Input Sensitivity
- Aux In	880 mV
- Digital In	IEC 60958
TUNER SECTION
Tuning Range	FM 87.5 – 108 MHz (50 kHz steps)
..........................................................................	MW 531 – 1602 kHz (9 kHz steps)
26 dB Quieting Sensitivity	FM 20 dB
26 dB Quieting Sensitivity	MW 3162 ∝ V/m
Image Rejection Radio	FM 25 dB
................................................................................................................................	MW 28 dB
IF Rejection Ratio	FM 60 dB
................................................................................................................................	MW 24 dB
Signal-to-Noise Ratio	FM 60 dB
................................................................................................................................	MW 40 dB
MW Suppression Ratio	FM 30 dB
Harmonic Distortion	FM Mono 3%
.........................................................................................................................	FM Stereo 3%
......................................................................................................................................	MW 5%
Frequency Response	FM 18 Hz – 10 kHz / ±6 dB
Stereo Separation	FM 26 dB (1 kHz)
Stereo Threshold	FM 23.5 dB
DVD SECTION
Laser Type	Semiconductor
Disc Diameter	12cm / 8cm
Video Decoding	MPEG-2
Video DAC	10 Bits
Signal System	PAL / NTSC
Video Format	4:3 / 16:9
Video S/N	56 dB (minimum)
Composite Video Output	1.0 Vp-p, 75 Ω
S-Video Output	Y - 1.0 Vp-p, 75 Ω
...........................................................................................................	C - 0.286 Vp-p, 75 Ω
SCART Video Output	R/G/B - 0.7 Vp-p, 75 Ω
Audio DAC	24 Bits / 96 kHz
Frequency Response	4 Hz – 20 kHz (44.1 kHz)
...................................................................................................	4 Hz – 22 kHz (48 kHz)
...................................................................................................	4 Hz – 44 kHz (96 kHz)
Digital Output	SPDIF Coaxial
SACD D/A converter	DSD
SACD cut-off frequency	30 kHz
MISCELLANEOUS
Power Supply Rating	220 – 240 V / 50 Hz
Power Consumption	160 W
Eco Power Standby	< 0.5 W
Dimensions (w x h x d)	390 mm x 73 mm x 360 mm
Weight
LX8000SA	5.8 kg
LX7000SA	5.6 kg
IR REMOTE CONTROL
Effective Range	> 8 Meter
Number of Keys	45
Battery (1.5V)	AA x 2

SPEAKERS (LX8000SA)

Front speakers / Rear (surround) speakers
System (front)		2-way shielded
System (surround)		2-way unshielded
Impedance			6 Ω
Speaker drivers		3” woofer, 2” x 3” ribbon tweeter
Dimensions (w x h x d)		89 mm x 270 mm x 41 mm
Weight		0.4 kg/each
Centre speaker
System		2-way shielded
Impedance			6 Ω
Speaker drivers	2 x 3” woofer, 2” x 3” ribbon tweeter
Dimensions (w x h x d)		286 mm x 95 mm x 67 mm
Weight			0.9 kg
SUBWOOFER (LX8000SA)
Subwoofer (not magnetically shielded design)
..........................................................................................		6.5” with wOOx technology
Output power		100 W (4 Ω	, DIN)
THD		10% at 100 Hz
Reproduction frequency response		.......................................... 30 Hz – 150 Hz
Phase switch		0O, 180O
Input sensitivity (Subwoofer In)		200 mVrms
AC power		220 – 240 V / 50 Hz
Power Consumption		53 W (at 1/8 Rated Power)
Dimensions (w x h x d)		195 mm x 462 mm x 263 mm
Weight			8.9 kg
SPEAKERS (LX7000SA)
Front speakers / Rear (surround) speakers
System (front)		2-way shielded
System (surround)		2-way unshielded
Impedance			6 Ω
Speaker drivers		3” full range, 1” piezo
Dimensions (w x h x d)		89 mm x 161 mm x 68 mm
Weight		0.4 kg/each
Centre speaker
System		2-way shielded
Impedance			6 Ω
Speaker drivers		3” full range, 1” piezo
Dimensions (w x h x d)		234 mm x 96 mm x 73 mm
Weight			0.9 kg
SUBWOOFER (LX7000SA)
Subwoofer (not magnetically shielded design)			6.5”
Output power		50 W (4 Ω	, DIN)
THD		10% at 100 Hz
Reproduction frequency response		.......................................... 30 Hz – 150 Hz
Phase switch		0O, 180O
Input sensitivity (Subwoofer In)		200 mVrms
AC power		220 – 240 V / 50 Hz
Power Consumption		53 W (at 1/8 Rated Power)
Dimensions (w x h x d)		143 mm x 338 mm x 377 mm
Weight			7.4 kg

Specifications subject to change without prior notice

28SPECIFICATIONS