Harman-Kardon manual Specifications, Modulus II Home Theater System Satellite Center Channel

Page 24

SPECIFICATIONS

Modulus II Home Theater System

	Satellite	Center Channel
Frequency Range:	100Hz – 20,000Hz (±3dB)	80Hz – 20,000Hz (±3dB)
Recommended
Amplifier Power Range:	15 – 125 watts	15 – 125 watts
Sensitivity:	86dB	88dB
(2.83V @ 1 meter)
Nominal Impedance:	8Ω	8Ω
Crossover Frequency:	2500Hz, 12dB/Octave	2500Hz, 12dB/Octave
Midrange Driver(s):	4" CMMD,™	Dual 4" CMMD,™
	magnetically shielded	magnetically shielded
High-Frequency Driver:	3/4" CMMD,	3/4" CMMD,
	magnetically shielded	magnetically shielded
Dimensions (H x W x D):	Shelf position	6-1/4" x 20-3/4" x 4-1/2"
	11" x 5-1/2" x 4-1/2"	(159mm x 527mm x 114mm)
	(279mm x 140mm x 114mm)
	Wall position
	9-3/4" x 5-1/2" x 5-3/4"
	(248mm x 140mm x 146mm)
Weight:	5.1 lb (2.3kg)	8.3 lb (3.8kg)

	Powered Subwoofer
Frequency Range:	27Hz – 100Hz (±3dB)
Amplifier Output:	300 watts RMS, 600 watts Peak
Low-Frequency Driver:	12" CMMD,™
	magnetically shielded
Crossover Frequency:	100Hz, 12dB/Octave
Dimensions (H x W x D):	16-3/4" x 14-1/2" x 18-1/8"
(including grille)	(425mm x 368mm x 460mm)
Weight:	44 lb (20kg)

Infinity continually strives to update and improve existing products, as well as create new ones.The specifications and construction details in this and related Infinity publications are therefore subject to change without notice.

20 MODULUS II HOME THEATER SYSTEM

Image 24

Contents Modulus Home Theater System Read First Ii Modulus II Home Theater SystemTable of Contents Modulus II Home Theater SystemIntroduction TechnologyUnpacking the System Sound-Level MeterGraph Templates Placement Planning Your SystemInstalling the Satellites For Shelf PlacementWall For Wall-MountingTurn Off All Power SatellitesMay damage your equipment ¡ R.A.B.O.S. On/Off Switch Subwoofer ControlsRear Panel Front Panel Few SuggestionsSubwoofer Connections Set Low-Pass Filter § to OffSet Low-Pass Filter § to On Operation R.A.B.O.S. Kit Includes Following Components What R.A.B.O.S. DoesR.A.B.O.S. Goal Performing R.A.B.O.S.TestsContents of the R.A.B.O.S. Test CD Rslm PlacementR.A.B.O.S. Sound-Level Meter Rslm Initial System-Level Setting Setting the Subwoofer Test LevelAdjusting the subwoofer levels for a 0dB peak Too Low When finished, press PauseLocating a test point Indicating an under-range testEffect of adjustable width Width B.O.S. Online What Does a Parametric Equalizer Do?Completing the Measurement Template These instructions are based on the example in FigureUsing the Width Selector Level What You Measure,What To DoOur example, you would enter 9 in the attenuation field Skip to the Adjusting the R.A.B.O.S. Equalizersection on Modulus II Home Theater System Adjusting the R.A.B.O.S. Equalizer Table below illustrates all switch positions PositionMaintenance and Service Final System BalanceSpecifications Modulus II Home Theater System Satellite Center ChannelFrequency Width Modulus II Home Theater System Modulus II Home Theater System