Harman-Kardon AVR 2000 MP3 Audio Playback, Selecting a Digital Source, Digital Status Indicators

Page 26

Operation

or a PCM audio track from DVD, use the Logic 7 C or Cinema mode. For stereo or surround encod- ed pure music recordings use the Logic 7 M or Music mode for a wider front sound stage (see Surround Mode Chart page 24).

MP3 Audio Playback

The AVR 2000 is one of the first A/V receivers to provide on-board decoding for the MP3 audio format used on specific computer audio files and by portable MP3 players/recorders. In addition, some new CD and DVD players are capable of playing back optical discs that are recorded with MP3, rather than standard CD audio information. By offering MP3 decoding, the AVR 2000 is able to deliver more precise conversion of the digital signals to an analog output, along with the ben- efits of listening to the MP3 audio through the AVR 2000’s high current amplifier and the speak- ers from your surround system, rather than the smaller speakers and low powered amplifiers typ- ically used with computers.

To take advantage of the AVR 2000’s MP3 capa- bilities, simply connect the PCM output of a com- puter sound card able to feed the MP3 format to its digital output, or the PCM output of MP3 compatible CD or DVD players or of a portable MP3 player with a digital output, to either the

rear panel Digital Inputs or the front panel Digital Inputs #$. When the digital MP3 signal is selected, the MP3 Bitstream Indicator Awill light, and the audio will begin playing.

NOTES:

•The AVR 2000 is only capable of playing sig- nals in the MP3 (MPEG 1/Layer 3) format. It is not compatible with other computer audio codecs.

•The MP 3 DSP mode found in the new

AVR 2000 requires an MP3 SPDIF stream. Presently, only a few units provide this but in the coming generations of motherboards and operat- ing system updates this will follow, since SPDIF is the standard for audio & video hardware.

•The digital audio input signal may be either optical or coaxial, but the signal must be in the PCM format. Direct connection of USB or serial data outputs is not possible, even though the sig- nals are in the MP3 format. If you have any ques- tions about the data output format from your computer or a sound card, check with the device’s Owner’s Manual or contact the manu- facturer’s technical support area.

Selecting a Digital Source

To utilize either digital mode you must have properly connected a digital source to the AVR 2000. Connect the digital outputs from DVD players, HDTV receivers, satellite systems or CD players to the Optical or Coaxial inputs on the

rear or front panel

#$. In order to pro-

vide a backup signal and a source for analog stereo recording, the analog outputs provided on digital source equipment should also be connect- ed to their appropriate inputs on the AVR 2000 rear panel (e.g., connect the analog stereo audio output from a DVD to the DVD inputs on the rear panel when you connect the source’s digital outputs).

When playing a digital source such as DVD, first select its input using the remote or front panel controls as outlined in this manual in order to feed its video signal (if any) to the TV monitor and to provide its analog audio signal for record- ing. When the digital input appropriate with the DVD player is not selected automatically (due to the input settings made earlier during the system configuration, see page 18), select the digital source by pressing the Digital Input Selector button FÒand then using the ⁄/¤ buttons

Con the remote or the Selector buttons 5 on the front panel to choose any of the OPTICAL or COAXIAL inputs, as they appear in the Main Information Display X and Display Indicators BE. When the digital source is playing, the AVR 2000 will automatical- ly detect whether it is a multichannel Dolby Digital, DTS source, MP3 or a conventional PCM signal, which is the standard output from CD players. A Bitstream Indicator Awill light in the Main Information Display Úto confirm that the digital signal is Dolby Digital, DTS, MP3 or PCM.

Note that a digital input (e.g. coaxial) remains associated with any analog input (e.g. DVD) as soon as it is selected, thus the digital input need not be re-selected each time the appropriate input choice (e.g. DVD) is made.

Digital Status Indicators

When a digital source is playing, the AVR 2000 senses the type of bitstream data that is present. Using this information, the correct surround mode will automatically be selected. For example, DTS bitstreams will cause the unit to switch to DTS decoding, and Dolby Digital bitstreams will enable Dolby Digital decoding. When the unit senses PCM data, from CDs and LDs and some music DVDs or certain tracks on normal DVDs, it will allow the appropriate surround mode to be selected manually. Since the range of available surround modes depends on the type of digital data that is present, the AVR 2000 uses a variety of indicators to let you know what type of signal is present. This will help you to understand the choice of modes and the input channels recorded on the disc.

When a digital source is playing, a Bitstream Indicator Awill light to show which type of signal is playing:

DOLBY D: When the DOLBY D indicator lights, a Dolby Digital bitstream is being received.

Depending on the audio track selected on the source player and number of channels on the disc, different surround modes are possible. Note that only one channel without subwoofer, called ”1.0” audio, or all five channels with subwoofer (”5.1” audio) or all steps between can be record- ed on digitally surround encoded audio tracks (see NOTE below). With all those tracks, except ”2.0” audio, only the Dolby Digital and VMAx modes are available. When the Dolby Digital sig- nal is only two channel (”2.0”) these two chan- nels (l and r) often contain Pro Logic surround informations. With those tracks the AVR 2000 automatically switches to the Pro Logic mode, but you may also select the Vmax mode.

DTS: When the DTS indicator lights, a DTS bit- stream is being received. When the unit senses this type of data, only the DTS mode may be used.

PCM: When the PCM indicator lights, a standard Pulse Code Modulation, or PCM, signal is being received. This is the type of digital audio used by conventional compact disc and laser disc record- ings. When a PCM bitstream is present, all modes except Dolby Digital and DTS are available. Note that the PCM signal format can be selected on the DVD player with any audio track, even with Dolby Digital tracks (but not with Dolby Digital decod- ing). So, if selected, even ”2.0” D.D. audio tracks can be played with all surround modes, also with the most effective Logic 7.

MP3: When the MP3 indicator lights, a compat- ible MPEG 1/Layer 3 digital signal is being received. This is the popular audio format used by many computer programs for recording com- pressed audio files. When an MP3 bitstream is present, the sound will automatically be played in the stereo (surround off) mode. The surround modes are not available during MP3 playback.

In addition to the Bitstream Indicators, the AVR 2000 features a set of unique channel input indicators that tell you how many channels of digital information are being received and if the digital signal is interrupted.

These indicators are the L/C/R/LS/RS/LFE letters that are inside the center boxes of the Speaker/Channel Input Indicators Pin the front panel Main Information Display Ú. When a standard analog stereo or matrix sur- round signal is in use, only the “L” and “R” indi- cators will light, as analog signals have only left and right channels, respectively, even surround recordings, carry surround information on the left and right channels only.

Digital signals, however, may have one to six sep- arate channels, depending on the program mate- rial, the method of transmission and the way in which it was encoded. When a digital signal is playing, the letters in these indicators will light in response to the specific signal being received. It

26OPERATION

Page 25 Page 27
Image 26
Page 25 Page 27
Contents AVR 2000 Audio/ Video Receiver Table of Contents Declaration of ConformityDescription and Features IntroductionUnpacking Safety InformationImportant Safety Information Front Panel Controls 5 6 7 8 9 ! @ $ %See page 29 for more information on tuning stations SeeDolby 3 Stereo Indicator Preset Indicator Front Panel Information DisplayFront Panel Information Display Rear Panel Connections Digital Audio Outputs Connect theseUnswitched Outlet Remote Control Functions 2000Remote Control Functions Has been pressedRemote Control Functions Video Equipment Connections Installation and ConnectionsAudio Equipment Connections Output jacksImportant Notes for S-Video connections Scart A/V ConnectionsImportant Note for Adapter Cables AC Power Connections System and Power ConnectionsRemote Control Extension Important Note for the Use SCART-Cinch AdaptersSpeaker Selection System ConfigurationSpeaker Placement Input Setup Settings to be Made With Each Input UsedSwitched AC outlet Speaker SetupSystem Configuration Surround Setup Delay SettingsOutput Level Adjustment To set the delay time, follow these stepsNight Mode Settings On the remote only, not the main volume controls Basic Operation Controls and Use of HeadphonesOperation Source SelectionSurround Mode Chart Dolby Digital Surround Mode SelectionDigital Audio Playback PCM Audio PlaybackSelecting a Digital Source Digital Status IndicatorsMP3 Audio Playback Rear or front panel #$. In order to proTape Recording Night ModeRecord mode Or 2 OutputsNormal output level adjustment for Output Level Trim AdjustmentMemory Backup Volume ControlTuner Operation Preset TuningRecalling Preset Stations Station SelectionRDS Display Options RDS TuningRDS Operation Station’s frequencyOperation Must be repeated first Programming the Remote with CodesDirect Code Entry Auto-Search MethodMacro Programming Erasing Macro CommandsProgramming the Remote Press the AVR SelectorProgrammed Device Functions Volume Punch-ThroughOperate the Volume Control Remote With Other DevicesTon , followed by the VID 2/TV Input Resetting the Remote MemoryChannel Control Punch-Through Selector buttonFunction List AM/FMAVR DVD Setup Code Table TV 040 091 078 088 102017 019 024 053 056 059 069 080 093 094 020 022 043 075 076 077 078 092 102Setup Code Table VCR 044 047 112 045 047 085 090 112 135054 155 082 091 109 155Setup Code Table CBL Code Number 3digit ListSetup Code Table CD Setup Code Table SAT Setup Code Table DVD Code Number 3 Digit ListTroubleshooting Guide Processor ResetTechnical Specifications Harman Consumer International

AVR 2000 specifications

The Harman-Kardon AVR 2000 is a versatile and powerful audio-video receiver designed to enhance your home entertainment experience. Engineered with cutting-edge technology, it delivers high-quality sound and video, making it a great choice for both audiophiles and casual listeners. The AVR 2000 emphasizes flexibility and connectivity, ensuring that it integrates seamlessly with a variety of components in your home theater setup.

One of the standout features of the AVR 2000 is its robust power output, with an impressive 100 watts per channel, which allows it to drive even the most demanding speakers with ease. This ensures that music enthusiasts can enjoy their favorite tracks with remarkable clarity and depth, while movie lovers can experience thrilling soundscapes that bring films to life.

The AVR 2000 supports a wide range of audio formats, including Dolby TrueHD and DTS-HD Master Audio, which are essential for delivering rich, cinematic sound. Whether you are playing a Blu-ray disc, streaming music, or gaming, the AVR 2000 offers a dynamic audio experience that enhances every moment.

In terms of video capabilities, the AVR 2000 supports 4K Ultra HD resolution, ensuring compatibility with the latest high-definition content. It features advanced video processing through its built-in HDMI ports, which allow for multiple device connections with support for 3D and HDCP 2.2. This means you can easily connect your TV, gaming console, and streaming devices without compromising on visual quality.

Another noteworthy characteristic of the AVR 2000 is its user-friendly interface, designed to make navigation and operation straightforward, even for beginners. The receiver includes an intuitive remote control and on-screen display, which simplify the process of customizing audio settings and adjusting inputs.

Moreover, the AVR 2000 integrates seamlessly with various wireless technologies, including Bluetooth, allowing users to easily stream music from their smartphones and tablets. This modern connection option enhances versatility, enabling users to enjoy their personal playlists without the need for additional cables.

In conclusion, the Harman-Kardon AVR 2000 is a feature-rich audio-video receiver that combines powerful performance with modern connectivity options. With support for various audio formats, superior video capabilities, and user-friendly design, it stands out as an excellent addition to any home theater setup, providing an immersive entertainment experience for users of all kinds.
Top Page Image Contents