Harman-Kardon AVR 2000 owner manual Unswitched Outlet

Page 10

Rear Panel Connections

Front/Center Speaker Outputs: Connect these outputs to the matching + or – terminals on your front/center speakers. When making speaker connections, always make certain to maintain correct polarity by connecting the red

(+)terminals on the AVR 2000 to the red (+) terminals on the speaker and the black (–) ter- minals on the AVR 2000 to the black (–) termi- nals on the speakers. (See page 14 for more information on speaker polarity.)

Surround Speaker Outputs: Connect these outputs to the matching + or – terminals on your left and right surround speakers. When making speaker connections always make cer- tain to maintain correct polarity by connecting the red (+) terminals on the AVR 2000 to the red (+) terminals on the speakers and the black

(–)terminals on the AVR 2000 to the black (–) terminals on the speakers. See page 14 for more information on speaker polarity.

Switched AC Accessory Outlet: This out- let may be used to power any device that you wish to have turn on when the unit is turned on with the System Power Control switch 2.

Unswitched AC Accessory Outlet: This outlet may be used to power any AC device. The power will remain on at this outlet regardless of whether the AVR 2000 is on or off (in Standby), provided that the Main Power switch 1is on.

Note: The total power consumption of all devices connected to the accessory outlets should not exceed 100 watts from the

Unswitched Outlet

and 50 W from the

Switched Outlet .

 

AC Power Cord: Connect the AC plug to an unswitched AC wall output.

Remote IR Output: This connection per- mits the IR sensor in the receiver to serve other remote controlled devices. Connect this jack to the “IR IN” jack on Harman Kardon or other compatible equipment.

Remote IR Input: If the AVR 2000’s front- panel IR sensor is blocked due to cabinet doors or other obstructions, an external IR sensor may be used. Connect the output of the sensor to this jack.

DVD Video Inputs: Connect these jacks to the composite or S-Video output jacks on a DVD player or other video source.

Video 1 Video Outputs: Connect these jacks to the RECORD/INPUT composite or S-Video jack on a VCR.

Video 3 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on any video source.

Video 2 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a second VCR or other video source.

Video 2 Video Outputs: Connect these jacks to the RECORD/INPUT composite or S-Video jacks on a second VCR.

Video 1 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a VCR or other video source.

Optical Digital Inputs: Connect the optical digital output from a DVD player, HDTV receiver, LD player, MD player or CD player to these jacks. The signal may be either a Dolby Digital signal, a DTS signal or a standard PCM digital source.

Coaxial Digital Inputs: Connect the coax digital output from a DVD player, HDTV receiver, LD player, MD player or CD player to these jacks. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digital output of an LD play- er to these jacks.

Video 3 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on any audio or video source.

Video 2 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a VCR or other video source.

Video 2 Audio Outputs: Connect these jacks to the RECORD/INPUT audio jacks on a VCR or any Audio recorder.

Note: Either the Video or S-Video output of any S-Video source must be connected to the AVR 2000, not both in parallel, otherwise the video may be disturbed or its performance be adverse- ly effected.

10REAR PANEL CONNECTIONS

Page 9 Page 11
Image 10
Page 9 Page 11
Contents AVR 2000 Audio/ Video Receiver Table of Contents Declaration of ConformityDescription and Features IntroductionImportant Safety Information Safety InformationUnpacking Front Panel Controls 5 6 7 8 9 ! @ $ %See page 29 for more information on tuning stations SeeDolby 3 Stereo Indicator Preset Indicator Front Panel Information DisplayFront Panel Information Display Rear Panel Connections Digital Audio Outputs Connect theseUnswitched Outlet Remote Control Functions 2000Remote Control Functions Has been pressedRemote Control Functions Video Equipment Connections Installation and ConnectionsAudio Equipment Connections Output jacksImportant Note for Adapter Cables Scart A/V ConnectionsImportant Notes for S-Video connections AC Power Connections System and Power ConnectionsRemote Control Extension Important Note for the Use SCART-Cinch AdaptersSpeaker Placement System ConfigurationSpeaker Selection Input Setup Settings to be Made With Each Input UsedSwitched AC outlet Speaker SetupSystem Configuration Surround Setup Delay SettingsNight Mode Settings To set the delay time, follow these stepsOutput Level Adjustment On the remote only, not the main volume controls Basic Operation Controls and Use of HeadphonesOperation Source SelectionSurround Mode Chart Dolby Digital Surround Mode SelectionDigital Audio Playback PCM Audio PlaybackSelecting a Digital Source Digital Status IndicatorsMP3 Audio Playback Rear or front panel #$. In order to proTape Recording Night ModeRecord mode Or 2 OutputsNormal output level adjustment for Output Level Trim AdjustmentMemory Backup Volume ControlTuner Operation Preset TuningRecalling Preset Stations Station SelectionRDS Display Options RDS TuningRDS Operation Station’s frequencyOperation Must be repeated first Programming the Remote with CodesDirect Code Entry Auto-Search MethodMacro Programming Erasing Macro CommandsProgramming the Remote Press the AVR SelectorProgrammed Device Functions Volume Punch-ThroughOperate the Volume Control Remote With Other DevicesTon , followed by the VID 2/TV Input Resetting the Remote MemoryChannel Control Punch-Through Selector buttonFunction List AM/FMAVR DVD Setup Code Table TV 040 091 078 088 102017 019 024 053 056 059 069 080 093 094 020 022 043 075 076 077 078 092 102Setup Code Table VCR 044 047 112 045 047 085 090 112 135054 155 082 091 109 155Setup Code Table CBL Code Number 3digit ListSetup Code Table CD Setup Code Table SAT Setup Code Table DVD Code Number 3 Digit ListTroubleshooting Guide Processor ResetTechnical Specifications Harman Consumer International

AVR 2000 specifications

The Harman-Kardon AVR 2000 is a versatile and powerful audio-video receiver designed to enhance your home entertainment experience. Engineered with cutting-edge technology, it delivers high-quality sound and video, making it a great choice for both audiophiles and casual listeners. The AVR 2000 emphasizes flexibility and connectivity, ensuring that it integrates seamlessly with a variety of components in your home theater setup.

One of the standout features of the AVR 2000 is its robust power output, with an impressive 100 watts per channel, which allows it to drive even the most demanding speakers with ease. This ensures that music enthusiasts can enjoy their favorite tracks with remarkable clarity and depth, while movie lovers can experience thrilling soundscapes that bring films to life.

The AVR 2000 supports a wide range of audio formats, including Dolby TrueHD and DTS-HD Master Audio, which are essential for delivering rich, cinematic sound. Whether you are playing a Blu-ray disc, streaming music, or gaming, the AVR 2000 offers a dynamic audio experience that enhances every moment.

In terms of video capabilities, the AVR 2000 supports 4K Ultra HD resolution, ensuring compatibility with the latest high-definition content. It features advanced video processing through its built-in HDMI ports, which allow for multiple device connections with support for 3D and HDCP 2.2. This means you can easily connect your TV, gaming console, and streaming devices without compromising on visual quality.

Another noteworthy characteristic of the AVR 2000 is its user-friendly interface, designed to make navigation and operation straightforward, even for beginners. The receiver includes an intuitive remote control and on-screen display, which simplify the process of customizing audio settings and adjusting inputs.

Moreover, the AVR 2000 integrates seamlessly with various wireless technologies, including Bluetooth, allowing users to easily stream music from their smartphones and tablets. This modern connection option enhances versatility, enabling users to enjoy their personal playlists without the need for additional cables.

In conclusion, the Harman-Kardon AVR 2000 is a feature-rich audio-video receiver that combines powerful performance with modern connectivity options. With support for various audio formats, superior video capabilities, and user-friendly design, it stands out as an excellent addition to any home theater setup, providing an immersive entertainment experience for users of all kinds.
Top Page Image Contents